Ignition Coil Delphi GN10322 - DEERK00057

Specifications:

• Brand New Delphi Ignition Coils
• Comes as a Set of 4
• Built to strict quality control standard
• Direct replacements
• 100% factory tested

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Removing the Engine Cover (0:24)

• Open the hood
• Remove plastic cover from the top of the engine

step : Removing the Ignition Coils (0:43)

• Disconnect electrical connector from coils
• Pull straight up on the coil to remove it

step : Replacing the Spark Plugs (1:24)

• Use your 5/8 spark plug socket with a ratchet and an extension to remove the spark plugs
• Reinstall the new spark plugs from 1A Auto.com
• Start threading them on by hand, do not use your ratchet
• Use the torque wrench and torque them down to 25 newton meters, or 18 ft-lbs

step : Installing New Ignition Coils (4:20)

• Slide the new coil pack down the spark plug tube until it clicks in place
• Use the tabs at the back to align it
• Reconnect the electrical connector

step : Reinstalling the Engine Cover (5:13)

• Reinstall the plastic engine cover
• Close the hood