1APBR00225-Hyundai Mitsubishi Plymouth Eagle Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set

Replaces

Hyundai Mitsubishi Plymouth Eagle Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set

1APBR00225

Part Details

  • Brake Rotor Type: Cross Drilled & Slotted
  • Front Brake Rotor Venting Type: Vented
  • Front Brake Rotor Diameter: 9.25 in. (235mm)
  • Wheel Lug Count: 4 Lug
  • Product Line: Performance
  • Brake Rotor Coating: Zinc Coated
  • Set Quantity: 2 Piece

This part replaces:

  • Reference Number 31320
FREE SAME DAY SHIPPING
Save 29%
List: $97.95 Save: $28.00
Only 7 left in stock
Part 1APBR00225
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BFS04338

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Wheel Lug Count:   4 Lug
  • Set Quantity:   2 Piece
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   9.25 in. (235mm)
  • Brake Rotor Coating:   Zinc Coated
  • Front Brake Rotor Venting Type:   Vented
  • Product Line:   Performance

Specifications:

  • Comes as a matched Pair
  • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 4 Lug Wheels
  • 9.25" (235 mm) Diameter Vented Rotor
True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:53)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the hub cap
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:13)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brake Pads (1:46)
    • Remove the two 14mm bolts from the brake caliper
    • Pry off the caliper with a flat blade screwdriver
    • Pull the caliper aside
    • Pull off the brake pads
  4. step : Removing the Brake Rotor (2:35)
    • Remove the two 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the two Phillips head screws from the brake rotor with an impact screwdriver and a hammer
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:48)
    • Slide the rotor on
    • Insert the two Phillips screws into the rotor
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad or Channellock pliers to push the pistons back
    • Check that the caliper bracket slides move smoothly
    • Add grease to the bracket slides as necessary
    • Clean the brake pad slides with a wire brush
    • Put the caliper bracket back into place
    • Start the two 17mm bolts by hand
    • Tighten the 17mm bolts to 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (5:23)
    • Install the brake pad with the metal shield on the inside
    • Install the other pad on the outside
    • Put the caliper on
    • Thread the 14mm bolts by hand
    • Tighten the 14mm bolts to between 22 - 25 foot-pounds
  7. step : Reattaching the Wheel (6:11)
    • Straighten the rotor by hand or turn the steering wheel to turn the rotor
    • Make sure the rotor moves smoothly on the backing plate
    • Slide the wheel into place
    • Put the hub cap into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (7:06)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Wire Brush
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Impact Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 22mm Socket
  • 14mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1992-1996Eagle Summit Eagle Summit Wagon with 4 Wheel Disc Brakes Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
1998Hyundai Elantra Hyundai Elantra (Built After 8/16/98 Production Date) Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
1999-2006Hyundai Elantra Hyundai Elantra Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
1999-2001Hyundai Sonata Hyundai Sonata Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
1999-2001Hyundai Tiburon Hyundai Tiburon Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
1992-1995Mitsubishi Expo Mitsubishi Expo with ABS Brakes Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
1992-1994Plymouth Colt Plymouth Colt Wagon with 4 Wheel Disc Brakes Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set

Part Interchange

Brand Label Part Number
Aimco 31320
Bendix PRT5576
DuraGo BR31320
Raybestos Brakes 980112
Wagner BD125798

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BFS04338
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Hyundai Mitsubishi Plymouth Eagle Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set-1APBR00225 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.