1AACV00175-Hyundai Kia Front Passenger Side CV Axle Shaft


Hyundai Kia Front Passenger Side CV Axle Shaft TRQ CSA82225


Part Details

This part replaces:

  • Hollander 447-60782CR
  • A1 Cardone 66-3469
  • OE # 495002D512
Save 39%
List: $113.95 Save: $44.00
Part 1AACV00175
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: CSA82225

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Note: This is correct for models with or without ABS brakes.  The tone ring can be removed if the original CV axle did not have one and the vehicle did not originally come equipped with ABS brakes.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:53)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Remove the hub cap
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:12)
    • Remove the cotter pin from the axle with needle nose pliers
    • Remove the 32mm nut from the axle with a breaker bar and pipe for leverage
    • Turn the wheel by hand
    • Hold the upper sway bar link bolt with a 14mm wrench
    • Remove the upper 14mm nut from the sway bar link
    • Hold the lower sway bar link bolt with a 14mm wrench
    • Remove the lower 14mm nut from the sway bar link
    • Pull off the sway bar link
  3. step : Separating the Control Arm (3:58)
    • Loosen the 19mm nut from the lower ball joint
    • Strike the wheel spindle with a hammer to loosen the ball joint
    • Remove the 19mm nut
    • Separate the lower ball joint from the wheel spindle
  4. step : Removing the Axle (5:55)
    • Strike the axle end with a hammer to loosen it up
    • Separate the axle from the wheel
    • Have a drain pan ready
    • Pry the axle away from the transmission with a drain pan
    • Allow the transmission fluid to drain
    • Pull the axle shaft out
  5. step : Installing the New Axle Shaft (6:51)
    • Feed the axle into place through the wheel well
    • Line up the axle splines with the transmission
    • Push the axle into the transmission
    • Apply penetrating oil to the axle splines
    • Push the axle into the wheel
  6. step : Reattaching the Control Arm (7:57)
    • Push the ball joint into the steering knuckle
    • Start the 19mm nut onto the ball joint
    • Put the center nut onto the axle
    • Tighten the center nut to 175 foot-pounds of torque
    • Hammer the cotter pin into the center nut
    • Bend the cotter pin into place with needle nose pliers
    • Tighten the 19mm nut
  7. step : Reinstalling the Sway Bar Link (9:09)
    • Put the sway bar link into place
    • Fasten the 14mm nuts onto the sway bar link, holding the bolts with a wrench
  8. step : Reattaching the Wheel (10:05)
    • Slide the wheel into place
    • Put the hub cap on
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Drain Pan
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 22mm Socket
  • 32mm Socket

  • Wrenches - Metric

  • 19mm Wrench
  • 14mm Wrench

  • Wrenches - SAE

  • 9/16 Inch Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I need a full cv shaft for passenger with 29 inner and 27 outter splines??
Chad D June 24, 2020
Thank you for your inquiry. Actual measurements and specs are not listed or available. Our parts are exact replacements for your vehicles OEM parts. As long as your year, make, and model match up with our listing and you confirm any other fit details in the fit chart, these parts will directly fit and function like the originals. Please let us know if you have any other questions. Thank you!.
Tim K June 29, 2020

Fits the following Makes:

Year Make Model Description
2001-2006Hyundai Elantra Hyundai Elantra Automatic Transmission Front Passenger Side CV Axle Shaft
2003-2008Hyundai Tiburon Hyundai Tiburon L4 2.0L Automatic Transmission Front Passenger Side CV Axle Shaft
2004Kia Spectra Kia Spectra L4 2.0L Automatic Transmission Front Passenger Side CV Axle Shaft
2005-2006Kia Spectra Kia Spectra Automatic Transmission Front Passenger Side CV Axle Shaft
2005-2006Kia Spectra 5 Kia Spectra 5 Automatic Transmission Front Passenger Side CV Axle Shaft

Part Interchange

Brand Label Part Number
Cardone New 66-3469
Cardone Select 66-3469
GSP NCV37530
Hyundai 495002C710
Hyundai 495002D510
Hyundai 495002D512
Hyundai 495002D511
Hyundai 495002D513
Hyundai OEM 495002D513
Hyundai OEM 495002C710
Hyundai OEM 495002D510
Hyundai OEM 495002D511
Hyundai OEM 495002D512
Kia 495002F310

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: CSA82225
Product Reviews
5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Axle shaft
Ordered great just the right part and was delivered in record time. Fit perfectly. no trouble to change.
June 22, 2019
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Hyundai Kia Front Passenger Side CV Axle Shaft TRQ CSA82225-1AACV00175 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.