Replaces

Hyundai Elantra Rear Sway Bar Link Pair

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Quantity:   Pair

Specifications:

  • Brand New Sway Bar Links
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:21)
    • Raise the vehicle with minimal weight on the tire
    • Loosen the five 21 mm lug nuts
    • Raise and support the vehicle
    • Remove the five lug nuts
    • Remove the hubcap
    • Remove the wheel
  2. step : Removing the Rear Sway Bar Link (1:25)
    • Remove the 14 mm nut from the lower end of the sway bar link, holding the sway bar link stud with locking pliers to hold it from spinning
    • Remove the 14 mm nut from the upper end of the sway bar link, holding the sway bar link stud with locking pliers to hold it from spinning
    • Remove the sway bar link
  3. step : Installing the Rear Sway Bar Link (6:11)
    • Insert the upper and lower sway bar link studs into their mounting locations
    • Install the 14 mm nut onto the upper and lower sway bar link studs
    • The 1A Auto replacement sway bar link stud can be held steady with a 14 mm wrench
    • Tighten the 14mm nut onto the upper and lower sway bar link studs
  4. step : Installing the Wheel (8:15)
    • Slide the wheel onto the wheel studs
    • Replace the hubcap
    • Replace and tighten the 21 mm lug nuts by hand
    • Lower the vehicle with minimal weight on the wheel
    • Torque the lug nuts to 80 ft-lb in a star pattern
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Locking Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Sway bar links
Fits!
April 17, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2007-2010Hyundai Elantra Hyundai Elantra Rear Sway Bar Link Pair
2011-2012Hyundai Elantra Hyundai Elantra Wagon Rear Sway Bar Link Pair

Part Interchange

Brand Label Part Number
Beck / Arnley 101-5754
Beck/Arnley 101-5754
MOOG K750102
MOOG Chassis Products K750102

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASFK03276
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.