1ABFS00130-Hyundai Elantra Front Ceramic Brake Kit


2009 Hyundai Elantra Sedan Front Ceramic Brake Kit

Guaranteed to fit: 2009 Hyundai Elantra

Fit Details

  • Front or Rear Location: Front
  • Body Type: Sedan

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Brake Pad Features & Benefits: OE Grade Multi-Layer Shim
  • Brake Pad Features & Benefits: Positive Mold Technology
  • Brake Pad Features & Benefits: Environmentally Compliant
  • Brake Pad Features & Benefits: Thermal Scorched
  • Brake Pad Friction Material: Ceramic
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware
Save 32%
List: $117.95 Save: $38.00
Part 1ABFS00130
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: BKA10560
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (2) Front Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:23)
    • Raise the vehicle with minimal weight on the tire
    • Loosen the five 21 mm lug nuts
    • Raise and support the vehicle
    • Remove the five lug nuts
    • Remove the hubcap
  2. step : Removing the Brake Caliper and Rotor (0:44)
    • Loosen the 10 mm brake bleeder screw and then tighten it again to ensure it can be opened later
    • Remove the two 14 mm brake caliper slider bolts
    • Remove the brake caliper, prying it off if necessary
    • Set the caliper aside or hang it so there is no tension on the brake hose
    • Remove the two 17 mm caliper bracket bolts
    • Remove the caliper bracket
    • Remove the brake pads from the caliper bracket, hammering them out from the back side if necessary
    • Remove the brake rotor
  3. step : Servicing the Brake Caliper Bracket (5:43)
    • Remove the brake pad tins
    • Remove the two caliper sliders
    • Remove the caliper slider boots
    • Clean the caliper sliders
    • Clean the caliper slider channels
    • Clean the caliper slider boots as necessary
    • Clean the caliper bracket notches where the tins sit
    • Clean the caliper tins
    • Apply brake grease to the notches where the brake tins will sit
    • Install the brake tins into each notch of the caliper bracket
    • Apply brake grease to the caliper slider channel and boot
    • Install the caliper slider boot
    • Apply brake grease to the caliper sliders
    • Install the caliper sliders
  4. step : Installing the Brake Rotor and Caliper (19:29)
    • Clean the wheel hub as necessary
    • Apply anti-seize grease to the wheel hub
    • Clean the brake rotor
    • Install the brake rotor
    • Install the caliper bracket onto the knuckle
    • Secure the caliper bracket with the two 17 mm caliper bracket bolts
    • Torque the two caliper bracket bolts to 72 ft-lb
    • Crimp the brake hose with pinch-off pliers
    • Open the 10 mm caliper bleeder screw
    • Compress the caliper piston back into the caliper
    • Release the pinch-off pliers
    • Close the bleeder screw
    • Install the brake pads into the caliper bracket
    • Apply brake grease to the brake pad contact surfaces of the brake caliper
    • Install the brake caliper onto the caliper bracket
    • Secure the caliper with the two 14 mm brake caliper slider bolts
    • Torque the caliper slider bolts to 23 ft-lb
    • Press the brake pedal 3-5 times, gently
    • Open the brake caliper bleeder screw to allow fluid to gravity bleed, then close the bleeder screw
  5. step : Installing the Wheel (28:12)
    • Slide the wheel onto the wheel studs
    • Replace the hubcap
    • Replace and tighten the 21 mm lug nuts by hand
    • Lower the vehicle with minimal weight on the wheel
    • Torque the lug nuts to 80 ft-lb in a star pattern
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Anti-Seize Grease
  • Brake Grease

  • Pliers, Cutters & misc Wrenches

  • Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Pocket Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket
  • 10mm Socket

  • Specialty Tools

  • Blowtorch

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2007-2008Hyundai Elantra Hyundai Elantra Front Ceramic Brake Kit
2009-2010Hyundai Elantra Hyundai Elantra Sedan Front Ceramic Brake Kit

Part Interchange

Brand Label Part Number
Aimco 31453
Bendix PRT5921
DIY Solutions BFS00279
DuraGo BR900442
Raybestos MGD924CH
Raybestos EHT924H
Raybestos SGD924C
Raybestos Brakes EHT924H
Raybestos Brakes MGD924CH
Raybestos Brakes SGD924C
Raybestos Brakes 980504
Wagner BD126533

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: BKA10560
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Fit and works great!
April 17, 2019
Great rotor and brakes at a Great Price!
Thank you for fast shipping and perfect fit. Price is crazy good and job was pretty easy with your free online tutorials. I ended up ordering rear brake hardware as well and that job went super good too. Driving like a charm now. Thanks for a superb product and buying experience. Jeff
July 8, 2019
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Hyundai is a registered trademark of Hyundai Motor Company. 1A Auto is not affiliated with or sponsored by Hyundai or Hyundai Motor Company. See all trademarks.

Hyundai Elantra Front Ceramic Brake Kit-1ABFS00130 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2009 Hyundai Elantra with these options.