Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:58)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:35)
    • Turn the wheel by hand
    • Clean off the threads with rust penetrant and a wire brush if necessary
    • Hold the lower stabilizer link stud with a 14mm wrench
    • Remove the nut from the stabilizer link with a 15mm hex socket
    • If the nut strips out, hold it in place with locking pliers and sawzall it off
  3. step : Reinstalling the Stabilizer Link (3:41)
    • Push the stabilizer link into place
    • Start the nuts by hand
    • Tighten the nuts
    • Torque the nuts to 29 foot-pounds
  4. step : Reattaching the Wheel (4:19)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Sawzall

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Control Arm Assy Kit
Very pleased with the product and my van does not sound like the bottom is falling out any longer. The control Arm and tie rods fit perfectly and came with cotter pins and grease for install. Saved me thousands on repair and part costs! Definitely recommend.
September 26, 2017
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(05:14 min)

Tools List:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Sawzall

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench



This part replaces:

  • Moog EV800226
  • Moog ES800224
  • Dorman 521-711
  • Dorman 521-712
  • Hollander 512-58872L
  • Hollander 512-58871R
  • OE # 51320SHJA02
  • OE # 51360SHJA01
  • OE # 51350SHJA03
  • OE # 53010SHJA02
  • OE # 53540SHJA01
  • Moog K750304
  • Beck Arnley 101-6913

Vehicle Fit

  • 2005-2009 Honda Odyssey 8 Piece Set Steering & Suspension Kit for Models with Cast Iron Control Arms excluding Touring Models
  • 2010 Honda Odyssey 8 Piece Set Steering & Suspension Kit for Models with Cast Iron Control Arms
Part #: 1ASFK03975

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More