1ABFS02053-Honda Element Acura TL Rear Ceramic Brake Pad & Rotor Kit

Replaces

Honda Element Acura TL Rear Ceramic Brake Pad & Rotor Kit

1ABFS02053

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Venting Type: Solid
  • Rear Brake Rotor Diameter: 11.10 in. (282mm)
  • Wheel Lug Count: 5 Lug
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware
FREE SAME DAY SHIPPING
Save 34%
List: $97.95 Save: $33.00
Part 1ABFS02053
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA11482

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Brake Pad Friction Material:   Ceramic
  • Rear Brake Rotor Diameter:   11.10 in. (282mm)
  • Kit Includes:
      (1) Rear Ceramic Brake Pad Set
      (2) Rear Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:34)
    • Raise the vehicle with minimal weight on the wheel
    • Loosen the 19 mm lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Remove the wheel
  2. step : Removing the Brakes (1:15)
    • Loosen and tighten the brake bleeder screw to ensure it's not stuck
    • Remove the 14 mm brake caliper slider pins
    • Remove the brake caliper
    • Open the brake bleeder screw
    • Compress the brake caliper piston
    • Close the brake bleeder screw
    • Hang or support the brake caliper
    • Remove the two 19 mm caliper bracket bolts
    • Remove the caliper bracket
    • Remove the brake pads from the caliper bracket
    • Remove the Phillips rotor screws
    • Remove the rotor, using a hammer if necessary
  3. step : Installing the Brake Rotor (6:46)
    • Transfer the brake shoe adjuster access boot to the new brake rotor
    • Clean the rotor surface
    • Clean the wheel hub surface
    • Apply anti-seize grease to the wheel hub surface
    • Adjust the parking brake shoes if necessary
    • Install the rotor onto the wheel studs
    • Remove the shoe adjuster access boot from the rotor
    • Align the access hole to the adjuster
    • Adjust the shoe tightness to cause light drag on the rotor
    • Replace the access boot
  4. step : Servicing the Brake Caliper Bracket (10:42)
    • Remove the brake pad tins from the brake caliper bracket
    • Clean the caliper bracket pad surface
    • Coat the caliper bracket pad surface with brake grease
    • Install cleaned or new brake pad tins
    • Remove and clean the brake caliper sliders
    • Apply brake grease inside the slider boots and onto the slider pins
  5. step : Installing the Brake Caliper (14:51)
    • Install the brake caliper bracket
    • Install the 19 mm bracket bolts
    • Torque the 19 mm bracket bolts to 41 ft-lb
    • Replace the caliper anti-rattle clip if necessary
    • Install the brake pads into the caliper bracket
    • Install the brake caliper
    • Install the 14 mm brake caliper slider bolts
    • Torque the 14 mm caliper slider bolts to 16 ft-lb
    • Open the brake bleeder screw to bleed the fluid until there is a steady stream, then close the bleeder
    • Pump the brake pedal to seat the pads
    • Check the brake fluid reservoir and top off the DOT3 fluid if necessary
  6. step : Installing the Wheel (18:47)
    • Install the wheel onto the wheel studs
    • Install the lug nuts and tighten them by hand
    • Lower the vehicle with minimal weight on the wheel
    • Torque the lug nuts to 80 ft-lb

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer
  • Jack Stands
  • Chisel
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Anti-Seize Grease
  • Silicone Paste
  • Brake Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Impact Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2004-2006Acura TL Acura TL V6 3.2L Rear Ceramic Brake Pad & Rotor Kit
2007-2008Acura TL Acura TL Rear Ceramic Brake Pad & Rotor Kit
2003-2011Honda Element Honda Element Rear Ceramic Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 31316
Bendix PRT5423
DuraGo BR31316
Raybestos MGD536CH
Raybestos EHT536H
Raybestos Brakes MGD536CH
Raybestos Brakes EHT536H
Raybestos Brakes 980151
Wagner BD126209

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA11482
Product Reviews
5.00/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
Acura TL brake kit
Great product at a affordable price! Would recommend this item.... love them
April 1, 2018
Great quality rear rotors for my acura tl
These brakes have been doing me good and i’m grateful for your websites tips and tricks
April 21, 2019
Very Happy with Brake Kit
This is my second time ordering from 1A Auto and I’m very happy with my rear brake kit. My first ones were the front brake kit. I’ve purchased from the local parts stores and I’ve never bought brakes of this caliber. To me they are as good as OEM or better. They ship quickly via UPS which gets them delivered when they say they will be received. I also needed caliper brackets because one of them had a seized slide pin but they don’t sell them. I guess because there is a core charge if you don’t return the old ones. That’s OK, I just purchased them locally. I will get future parts for my cars from 1A Auto when I need them because of their great prices and quick service. Thank you 1A Auto.
September 22, 2019
Struts
Good price and quality I’m happy
November 22, 2019
Very happy
I was very happy when I received my order. Everything was correct and the quality great! Shipping was fast.
June 18, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Honda Element Acura TL Rear Ceramic Brake Pad & Rotor Kit-1ABFS02053 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.