1ASFK03317-Honda Civic Front Driver Side Lower Control Arm

Replaces

Honda Civic Front Driver Side Lower Control Arm TRQ

1ASFK03317

Part Details

  • Includes: Ball Joint

This part replaces:

  • Beck Arnley 101-5950
  • Dorman 520-565
  • Hollander 512-50123L
  • Moog K500070
  • OE # 52130SNAA03
  • OE # 52130SNAA02
  • OE # 51360-SNA-A03
  • TRQ PSA62848
FREE SAME DAY SHIPPING
Save 33%
List: $107.95 Save: $36.00
Part 1ASFK03317
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA62848

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Includes:   Ball Joint

Specifications:

  • Brand New Control Arm & Ball Joint
  • Fits LH (Driver Side)
  • Direct replacement
  • Built to strict quality control standards

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:20)
    • Loosen the lug nuts with a 19mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Ball Joint (0:20)
    • Pull the knuckle toward you
    • Straighten the cotter pin
    • Remove the cotter pin from the castle nut
    • Loosen the nut with a 19mm wrench and dead blow mallet if needed
    • Remove the ball joint with a ball joint separator, ratchet, and socket
    • Remove the castle nut
    • Remove the ball joint from the lower control arm with a pry bar
  3. step : Installing the Ball Joint (5:18)
    • Clean the surface of the lower control arm
    • Insert the ball joint into the knuckle
    • Hand-tighten the castle nut
    • Maneuver the ball joint into the control arm
    • Tighten the bolts to the ball joint with a 17mm socket and ratchet
    • Torque the three lower nuts to 43 foot-pounds
    • Tighten the castle nut with a 22mm wrench
    • Insert the cotter pin
    • Bend the ends of the cotter pin
  4. step : Reattaching the Wheel (9:15)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • Complete Metric Wrench Set


Fits the following Makes:

Year Make Model Description
2006-2011Honda Civic Honda Civic Hybrid Front Driver Side Lower Control Arm
2006-2011Honda Civic Honda Civic GX Front Driver Side Lower Control Arm
2006-2011Honda Civic Honda Civic EX Front Driver Side Lower Control Arm
2006-2011Honda Civic Honda Civic DX Front Driver Side Lower Control Arm
2006-2011Honda Civic Honda Civic LX Front Driver Side Lower Control Arm
2008-2011Honda Civic Honda Civic EX-L Front Driver Side Lower Control Arm
2009-2011Honda Civic Honda Civic Hybrid-L Front Driver Side Lower Control Arm
2009-2011Honda Civic Honda Civic LX-S Front Driver Side Lower Control Arm

Part Interchange

Brand Label Part Number
Beck / Arnley 102-5294
Beck / Arnley 101-5950
Beck / Arnley 101-5294
Beck/Arnley 101-5950
Beck/Arnley 102-5294
Beck/Arnley 101-5294
CARQUEST CA410B
DIY Solutions SUS02672
DIY Solutions SUS00337
DIY Solutions SUS05422
Dorman - OE Solutions 520-565
Dorman OE Solutions 520-565
Honda 51360SNAA03
Honda OEM 51360SNAA03
Ingalls Engineering CAK620382
MAS Industries CA59163
MAS Industries CA59163PR
MOOG CK620382
MOOG K620382
MOOG K500070
MOOG Chassis Products K620382
MOOG Chassis Products CK620382
MOOG Chassis Products K500070
Mcquay-Norris FA4608
Mevotech GS60100
Mevotech CMS60100
Mevotech MS60100
Mevotech MS60500
NAPA Premium 2605712
Precision Driveline CB60078
Raybestos Chassis 507-1441
SYD 1509013

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA62848
Product Reviews
5.00/ 5.0 1
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great product
September 5, 2020
Ive had this for over a year now, my car is lowered so all of this stuff got destroyed
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Honda Civic Front Driver Side Lower Control Arm TRQ-1ASFK03317 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.