Honda Civic CR-V Element Acura RSX Front Passenger Side Sway Bar Link

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews


  • Fits the RH (Passenger Side) Front
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Tire (0:33)
    • Loosen the lug nut covers with a 19mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:09)
    • Remove the upper sway bar link nut with a 5mm allen wrench and a 14mm wrench
    • Remove the lower sway bar link nut with a 15mm socket and ratchet and a 14mm wrench
  3. step : Installing the Sway Bar Link (3:33)
    • Insert the sway bar link into place
    • Tighten the upper nut with a 5mm alllen wrench and a 14mm wrench
    • Tighten the lower nut with a 15mm socket and ratchet and a 14mm wrench
    • Torque the lower nut to 29 foot-pounds
  4. step : Installing the Tire (5:08)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Hex Wrenches

  • 5mm Hex Wrench

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

3.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Good Design with One Major Flaw
The original link requires an allen wrench or hex bit to be inserted into the end of the bolt while unscrewing the nut with an open-end wrench (which probably wont fit due to very limited space above and below the nut), or a pass-through socket & ratchet set (very pricey for one job). This re-design allows you to put the link on and take it off with a deep socket & ratchet and an open-end wrench. The main issue is that the size of the fixed nut is so thin that you have to have a specialized very flat wrench to allow you to tighten it down properly. I got lucky that I knew someone that had one because those are pricey too for a single-use job. If they changed the fixed nut to a standard width, this product would be exceptionally improved. It was quite annoying to have to put it on twice because of this issue. I cant speak for longevity or mileage, because Ive hardly gone over 100 miles on it yet, but if you dont get it tight, like I couldnt before I had the thin wrench, it will definitely rattle around and loosen up on you within 50 miles. Its not a pleasant noise, or a pleasant feeling.
January 19, 2020
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002-2006Acura RSX Acura RSX Front Passenger Side Sway Bar Link
2002-2006Honda CR-V Honda CR-V Front Passenger Side Sway Bar Link
2001-2005Honda Civic Honda Civic Front Passenger Side Sway Bar Link
2003-2011Honda Element Honda Element Front Passenger Side Sway Bar Link

Part Interchange

Brand Label Part Number
MOOG K90455
MOOG Chassis Products K90455

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASSL00090
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.