Replaces

Honda Acura Saturn Ignition Coil TRQ

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time and cause a misfire condition. In engines like this that use a coil, if the coil goes bad, the complete assembly needs to be replaced.

This Ignition Coil features the following specifications:

  • Brand New
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested

This coil is a distributorless application. Sold as Each. 4 or 6 are required per vehicle, based on engine size. Replace individually as needed.

 

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Ignition Coil (0:38)
    • Turn the two clips on the engine cover with a flat blade screwdriver
    • Pull off the engine cover
    • Disconnect the ignition coil wiring harness
    • Remove the 10mm nut from the ignition coil
    • Pull the ignition coil out of the engine
  2. step : Installing the New Ignition Coil (1:40)
    • Push the ignition coil into the engine
    • Connect the ignition coil wiring harness
    • Fasten the 10mm nut onto the ignition coil
    • Repeat these steps to replace each ignition coil
    • Put the engine cover into place
    • Tighten the two clips on the engine cover with a flat blade screwdriver

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
How to tell if an ignition coil is bad when you do spark plug change?
Mike J November 20, 2018
You can run a scan tool on it and it may come up with a code indicating that there has been part failure.
Emma F November 20, 2018

Fits the following Makes:

Year Make Model Description
2001-2005Acura EL Acura EL L4 1.7L Ignition Coil
2001-2009Acura MDX Acura MDX V6 3.5L Ignition Coil
2001-2005Honda Civic Honda Civic L4 1.7L Ignition Coil
2003-2008Honda Pilot Honda Pilot V6 3.5L Ignition Coil
2006-2008Honda Ridgeline Honda Ridgeline V6 3.5L Ignition Coil
2004-2007Saturn Vue Saturn Vue V6 3.5L Ignition Coil
Part 1AECI00122
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: ICA61737