Replaces
Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the blower motor on this 1998 Honda Civic and it's the same part and process for these Civics from '92 to 2000. The items you'll need are a new blower motor from 1AAuto.com, a flat blade screwdriver or pair of pliers, and an8 mm socket and ratchet.
Underneath the glove box on your passenger side, you'll see this panel with two clips on it. I'm going to just pry those out either using a flat blade screwdriver or pair of pliers. Once those are removed, this panel just pulls right out. Now, up underneath your glove box, your blower motor is located right here. It's held in with these three 8mm bolts: there and the third one is right back here. We'll just fast forward as Don removes each of those. Once those are removed, the blower motor pulls right down, and you can just disconnect this harness and just push in the tab. Pull it out.
Now, the old blower motor is on the right; the new blower motor from 1AAuto is on the left. You can see they're identical, and they will mount up exactly the same. Feed your new blower motor up into place and replace those three 8mm bolts and just tighten them up. You can see he starts each one by hand and then just tightens them up with a socket and ratchet. Be careful not to over tighten as you are just going into plastic. Reconnect your harness, and replace that panel and those two clips, and then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
HMA84769
