Replaces

Honda Acura Front Ceramic Brake Pads TRQ

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Kit Includes:
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:26)
    • Partially raise the vehicle with the wheel still contacting the ground
    • Loosen the 19 mm lug nuts
    • Raise and support the vehicle on jack stands
    • Remove the lug nuts
    • Replace one lug nut loosely
    • Hammer the tire from the back side if the wheel is stuck
    • Remove the last lug nut and the wheel
  2. step : Removing the Brakes (0:54)
    • Remove the bleeder screw cap
    • Slightly open the 10 mm bleeder screw to ensure it's not stuck
    • Remove the 12 mm brake slider bolts
    • Remove the caliper bracket
    • Open the 10 mm bleeder screw
    • Compress the brake caliper piston, draining the fluid into a drain pan
    • Tighten the 10 mm bleeder screw
    • Remove the 17 mm brake caliper bracket bolts
    • Remove the brake caliper bracket and pads
    • Remove the rotor from the wheel hub
    • Remove the brake pads from the caliper bracket
  3. step : Cleaning the Brake Components (4:21)
    • Clean the wheel hub surface
    • Clean the brake tins in the caliper bracket with a wire brush
    • Remove the brake tins from the caliper bracket
    • Clean the brake caliper bracket grooves
    • Remove the sliders from the brake caliper bracket and clean them
    • Remove the slider boots to clean and inspect for damage
    • Clean the slider holes in the caliper bracket
    • Replace the slider boots
    • Apply brake grease to the caliper bracket grooves
    • Reinstall the brake tins into the caliper bracket grooves
    • Apply brake grease to the caliper sliders
    • Reinstall the caliper sliders
    • Set the rotor on the wheel hub backwards to clean the braking surface, then turn it around to clean the other side
    • Apply anti seize grease to the wheel hub
  4. step : Installing the brakes (10:35)
    • Place the brake rotor on the wheel hub
    • Reinstall the brake caliper bracket
    • Reinstall the brake caliper bracket 17 mm bolts
    • Torque the 17 mm bracket bolts to 80 ft-lb
    • Seat the brake pads into the brake caliper bracket, making sure the pad with the wear indicator is placed on the inside
    • Reinstall the brake caliper
    • Reinstall the 12 mm caliper slider bolts
    • Torque the 12 mm slider bolts to 26 ft-lb
    • Open the 10 mm bleeder screw and allow the fluid to gravity bleed until there is a steady stream of fluid
  5. step : Installing the Wheel (13:07)
    • Slide the wheel onto the lug nuts
    • Replace the lug nuts and tighten them in a star pattern
    • Lower the vehicle with the wheel lightly touching the ground
    • Torque the lug nuts in a star pattern to 80 ft-lbs
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Drain Pan
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 12mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2013-2015Acura ILX Acura ILX Front Ceramic Brake Pads
2003-2007Honda Accord Honda Accord L4 2.4L Front Ceramic Brake Pads
2008-2012Honda Accord Honda Accord (excluding EX Models) L4 2.4L Front Ceramic Brake Pads
2002-2006Honda CR-V Honda CR-V Front Ceramic Brake Pads
2012-2015Honda CR-V Honda CR-V Front Wheel Drive Front Ceramic Brake Pads
2012-2015Honda Civic Honda Civic SI Front Ceramic Brake Pads
2013-2015Honda Civic Honda Civic EX Front Ceramic Brake Pads
2016-2018Honda Civic Honda Civic Front Ceramic Brake Pads
2003-2011Honda Element Honda Element Front Ceramic Brake Pads
2013-2014Honda FIT Honda FIT EV Front Ceramic Brake Pads
2003-2008Honda Pilot Honda Pilot Front Ceramic Brake Pads

Part Interchange

Brand Label Part Number
Raybestos MGD914CH
Raybestos EHT914H
Raybestos Brakes EHT914H
Raybestos Brakes MGD914CH

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ABPS02638
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BFA73184