Honda Accord Odyssey Blower Motor Resistor - 1AHBR00025

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This heater blower motor resistor is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! On most vehicles it is mounted to the HVAC unit inside the passenger compartment. It can be accessed from the passenger foot well area.


  • New, not remanufactured or rebuilt
  • Direct replacement
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • 4 terminal connection
  • 2 Mounting holes

If you are experiencing intermittent stopping during use or the fan only works in one position this may be your solution!

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Side Panel (0:45)
    • Remove the trim button near the rear compartment with a flat blade screwdriver
    • Remove the Phillips screw beneath the trim button
    • Pry off the plastic trim from the latch hook
    • Remove the 12mm bolt from the latch hook
    • Pry out on each side from the lower panel
    • Pull the panel up and out
    • Remove the trim piece on the side panel
    • Remove the Phillips screw beneath the trim piece
    • Pry out the side panel with a flat blade screwdriver
  2. step : Removing the Rear Blower Motor (1:38)
    • Remove the six 10mm bolts from the rear blower motor
    • Remove the blower motor
    • Disconnect the wiring harness
  3. step : Removing the Blower Motor Resistor (2:27)
    • Disconnect the resistor wiring harness
    • Remove the two Phillips screws from the resistor
    • Remove the resistor
  4. step : Installing the New Blower Motor Resistor (2:52)
    • Insert the resistor into the blower motor
    • Replace the two Phillips screws
    • Connect the resistor wiring harness
  5. step : Reinstalling the Rear Blower Motor (3:23)
    • Connect the wiring harness
    • Insert the blower motor into place
    • Insert the six 10mm bolts to the blower motor
  6. step : Reinstalling the Side Panel (4:22)
    • Push the side panel in place
    • Insert the Phillips screw to the side panel
    • Push on the trim piece to the side panel
    • Insert the lower panel into place
    • Insert the 12mm bolt to the latch hook
    • Insert the Phillips screw to the lower panel
    • Push on the trim piece to the lower panel
    • Push on the trim piece to the latch hook

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1994-1997Honda Accord Honda Accord Blower Motor Resistor
1995-1998Honda Odyssey Honda Odyssey Front Heater Blower Motor Resistor
2003-2004Honda Odyssey Honda Odyssey Rear Heater Blower Motor Resistor
Part #: 1AHBR00025

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:05 min)