1AHBR00025-Honda Accord Odyssey Blower Motor Resistor

Replaces

Honda Accord Odyssey Blower Motor Resistor DIY Solutions

1AHBR00025

This part replaces:

  • Standard Motor Products RU-78
  • OE # 79330SV4003
  • OE # 5862040300
  • DIY Solutions HVA00926
FREE SAME DAY SHIPPING
Save 31%
List: $35.95 Save: $11.00
Part 1AHBR00025
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: HVA00926

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Side Panel (0:45)
    • Remove the trim button near the rear compartment with a flat blade screwdriver
    • Remove the Phillips screw beneath the trim button
    • Pry off the plastic trim from the latch hook
    • Remove the 12mm bolt from the latch hook
    • Pry out on each side from the lower panel
    • Pull the panel up and out
    • Remove the trim piece on the side panel
    • Remove the Phillips screw beneath the trim piece
    • Pry out the side panel with a flat blade screwdriver
  2. step : Removing the Rear Blower Motor (1:38)
    • Remove the six 10mm bolts from the rear blower motor
    • Remove the blower motor
    • Disconnect the wiring harness
  3. step : Removing the Blower Motor Resistor (2:27)
    • Disconnect the resistor wiring harness
    • Remove the two Phillips screws from the resistor
    • Remove the resistor
  4. step : Installing the New Blower Motor Resistor (2:52)
    • Insert the resistor into the blower motor
    • Replace the two Phillips screws
    • Connect the resistor wiring harness
  5. step : Reinstalling the Rear Blower Motor (3:23)
    • Connect the wiring harness
    • Insert the blower motor into place
    • Insert the six 10mm bolts to the blower motor
  6. step : Reinstalling the Side Panel (4:22)
    • Push the side panel in place
    • Insert the Phillips screw to the side panel
    • Push on the trim piece to the side panel
    • Insert the lower panel into place
    • Insert the 12mm bolt to the latch hook
    • Insert the Phillips screw to the lower panel
    • Push on the trim piece to the lower panel
    • Push on the trim piece to the latch hook

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 10mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1994-1997Honda Accord Honda Accord Blower Motor Resistor
1995-1998Honda Odyssey Honda Odyssey Front Heater Blower Motor Resistor
2003-2004Honda Odyssey Honda Odyssey Rear Heater Blower Motor Resistor

Part Interchange

Brand Label Part Number
DIY Solutions HVA00926

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: HVA00926
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Honda accord 1995 blower motor resistor
Great product 1A auto has everything that fits and good aftermarket/oem parts. Had a couple bolts taken out and this install was a breeze thanks to 1A auto
December 15, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Honda Accord Odyssey Blower Motor Resistor DIY Solutions-1AHBR00025 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.