1APBS00503-Honda Accord Front Ceramic Performance Brake Pad & Rotor Kit

Replaces

Honda Accord Front Ceramic Performance Brake Pad & Rotor Kit

1APBS00503

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Front Brake Rotor Venting Type: Vented
  • Front Brake Rotor Diameter: 11.10 in. (282mm)
  • Rear Brake Rotor Venting Type: Vented
  • Rear Brake Rotor Diameter: 11.10 in. (282mm)
  • Wheel Lug Count: 5 Lug
  • Product Line: Performance
FREE SAME DAY SHIPPING
Save 22%
List: $197.95 Save: $43.00
Only 4 left in stock
Part 1APBS00503
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA12406

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Vented
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   11.10 in. (282mm)
  • Front Brake Rotor Venting Type:   Vented
  • Rear Brake Rotor Diameter:   11.10 in. (282mm)
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (1) Rear Ceramic Brake Pad Set
      (2) Front Performance Brake Rotors
      (2) Rear Performance Brake Rotors
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:27)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (0:49)
    • Remove the 12mm bolt from the brake line bracket
    • Remove the 17mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
  3. step : Removing the Brake Rotor (3:06)
    • Remove 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (6:09)
    • Turn the caliper piston in with needle nose pliers
    • Clean the brake pad slides with a wire brush and brake parts cleaner
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  5. step : Installing the New Brake Rotor (9:24)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the caliper bracket back into place
    • Start the 14mm bolts by hand
    • Tighten the bolts to 54 foot-pounds of torque
  6. step : Installing the New Brake Pads (10:33)
    • Place brake grease on the brake pad tab
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Counterhold the caliper slide with a 17mm wrench and tighten with a 12mm socket and ratchet
    • Tighten bolts to 17 foot-pounds
    • Tighten the brake line bracket with a 12mm bolt
  7. step : Reattaching the Wheel (12:25)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 79.6 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket
  8. step : Testing the Brakes (13:08)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Pick
  • Rubber Mallet
  • Floor Jack
  • Center Punch
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease
  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 10mm Socket

  • Specialty Tools

  • Dead Blow Hammer

  • Wrenches - Metric

  • 12mm Wrench
  • 17mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
So this kit will fit a 2010 accord lx front and rear?
Shawn S March 26, 2018
yes
Arturo A March 27, 2018
Would this kit fit a 2012 Honda Accord coupe exl v6?
Austen D August 24, 2020
Thank you for the inquiry. Currently, we do not carry this part for your vehicle. Were always updating our inventory so please check back soon! If you have any other questions, let us know.
Christa R August 24, 2020

Fits the following Makes:

Year Make Model Description
2008-2010Honda Accord Honda Accord LX Front Ceramic Performance Brake Pad & Rotor Kit
2008-2010Honda Accord Honda Accord LX-P L4 2.4L Front Ceramic Performance Brake Pad & Rotor Kit
2008-2010Honda Accord Honda Accord LX-S L4 2.4L Front Ceramic Performance Brake Pad & Rotor Kit
2011-2012Honda Accord Honda Accord SE L4 2.4L Front Ceramic Performance Brake Pad & Rotor Kit
2011-2012Honda Accord Honda Accord LX L4 2.4L Front Ceramic Performance Brake Pad & Rotor Kit
2011-2012Honda Accord Honda Accord LX-S L4 2.4L Front Ceramic Performance Brake Pad & Rotor Kit
2011-2012Honda Accord Honda Accord LX-P L4 2.4L Front Ceramic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 31257
Aimco 31479
Bendix PRT6208
Bendix PRT5232
Bendix PRT5773
DuraGo BR31257
DuraGo BR900520
Raybestos EHT1336H
Raybestos SGD1336C
Raybestos EHT914H
Raybestos MGD914CH
Raybestos MGD1336CH
Raybestos Brakes MGD1336CH
Raybestos Brakes EHT914H
Raybestos Brakes EHT1336H
Raybestos Brakes SGD1336C
Raybestos Brakes MGD914CH
Raybestos Brakes 96711
Raybestos Brakes 980577
Wagner BD126543
Wagner BD126561
Wagner BD126414
Wagner BD125669

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA12406
Product Reviews
5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Good product great price
Fast delivery. Quality product perfect fit no issues.
February 27, 2017
Very Good!
All fit great except the front rotors. They were about 3/16 too thick and the caliper housing wouldnt fit over them. !Aauto promptly refunded the price of the rotors.
June 19, 2018
Great kit
This was an awesome kit for my ninth gen Honda Accord. been going strong for two years now. I would totally recommend this kit.
June 10, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Honda Accord Front Ceramic Performance Brake Pad & Rotor Kit-1APBS00503 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.