1ABFS02674-Honda Accord Front Ceramic Brake Pad & Rotor Kit

Replaces

Honda Accord Front Ceramic Brake Pad & Rotor Kit TRQ

1ABFS02674

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors

This part replaces:

  • TRQ BKA11784
FREE SAME DAY SHIPPING
Save 24%
List: $130.95 Save: $31.00
Part 1ABFS02674

Out of Stock

Free GROUND SHIPPING

Close



TRQ
Brand #: BKA11784
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (2) Front Replacement Brake Rotors

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:27)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (0:49)
    • Remove the 12mm bolt from the brake line bracket
    • Remove the 17mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
  3. step : Removing the Brake Rotor (3:06)
    • Remove 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (6:09)
    • Turn the caliper piston in with needle nose pliers
    • Clean the brake pad slides with a wire brush and brake parts cleaner
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  5. step : Installing the New Brake Rotor (9:24)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the caliper bracket back into place
    • Start the 14mm bolts by hand
    • Tighten the bolts to 54 foot-pounds of torque
  6. step : Installing the New Brake Pads (10:33)
    • Place brake grease on the brake pad tab
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Counterhold the caliper slide with a 17mm wrench and tighten with a 12mm socket and ratchet
    • Tighten bolts to 17 foot-pounds
    • Tighten the brake line bracket with a 12mm bolt
  7. step : Reattaching the Wheel (12:25)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 79.6 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket
  8. step : Testing the Brakes (13:08)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Pick
  • Rubber Mallet
  • Floor Jack
  • Center Punch
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease
  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 10mm Socket

  • Specialty Tools

  • Dead Blow Hammer

  • Wrenches - Metric

  • 12mm Wrench
  • 17mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2013-2017Honda Accord Honda Accord EX-L V6 3.5L Front Ceramic Brake Pad & Rotor Kit
2013-2015Honda Accord Honda Accord Touring V6 3.5L Front Ceramic Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Bendix PRT6207
DIY Solutions BFS00872
DuraGo BR901178
Raybestos MGD1654CH
Raybestos EHT1654H
Raybestos SGD1654C
Raybestos Brakes EHT1654H
Raybestos Brakes MGD1654CH
Raybestos Brakes SGD1654C
Raybestos Brakes 981037
Raybestos Brakes 981022
Wagner BD180567
Wagner BD180583

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA11784
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Honda Accord Front Ceramic Brake Pad & Rotor Kit TRQ-1ABFS02674 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.