1APBS00068-Honda Accord Acura TSX Rear Ceramic Performance Brake Pad & Rotor Kit

Replaces

Honda Accord Acura TSX Rear Ceramic Performance Brake Pad & Rotor Kit TRQ Performance BKA12091

1APBS00068
FREE SAME DAY SHIPPING
Save 27%
List: $95.95 Save: $26.00
Part 1APBS00068
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ Performance
Brand #: BKA12091

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Premium G-Coated
  • Rear Brake Rotor Diameter:   10.24 in. (260mm)
  • Kit Includes:
      (1) Rear Ceramic Brake Pad Set
      (2) Rear Performance Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits

  • Same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims & pad chamfering provide smooth & quite braking
Performance Brake Kit Features and Benefits
  • Longer life - Positive molded to ensure even wear and enhanced performance
  • Less dust - Cleaner, quieter, smoother, includes 3 layer OE-grade shims
  • Better stopping power - Cross-drilled and slotted to reduce brake fade
  • Durable - True non-interference vane design for structural integrity and cooling

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:27)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (0:49)
    • Remove the 12mm bolt from the brake line bracket
    • Remove the 17mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
  3. step : Removing the Brake Rotor (3:06)
    • Remove 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (6:09)
    • Turn the caliper piston in with needle nose pliers
    • Clean the brake pad slides with a wire brush and brake parts cleaner
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  5. step : Installing the New Brake Rotor (9:24)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the caliper bracket back into place
    • Start the 14mm bolts by hand
    • Tighten the bolts to 54 foot-pounds of torque
  6. step : Installing the New Brake Pads (10:33)
    • Place brake grease on the brake pad tab
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Counterhold the caliper slide with a 17mm wrench and tighten with a 12mm socket and ratchet
    • Tighten bolts to 17 foot-pounds
    • Tighten the brake line bracket with a 12mm bolt
  7. step : Reattaching the Wheel (12:25)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 79.6 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket
  8. step : Testing the Brakes (13:08)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Pick
  • Rubber Mallet
  • Floor Jack
  • Center Punch
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease
  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 10mm Socket

  • Specialty Tools

  • Dead Blow Hammer

  • Wrenches - Metric

  • 12mm Wrench
  • 17mm Wrench


Fits the following Makes:

Year Make Model Description
2004-2008Acura TSX Acura TSX Rear Ceramic Performance Brake Pad & Rotor Kit
2003-2004Honda Accord Honda Accord Rear Ceramic Performance Brake Pad & Rotor Kit
2005-2007Honda Accord Honda Accord Rear Ceramic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 31315
Bendix PRT5405
DuraGo BR31315
Raybestos SGD537C
Raybestos EHT537H
Raybestos MGD537CH
Raybestos Brakes SGD537C
Raybestos Brakes EHT537H
Raybestos Brakes MGD537CH
Raybestos Brakes 980138
Wagner BD126082

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ Performance
Brand #: BKA12091
Product Reviews
5.00/ 5.0 2
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Best place to buy parts from
December 18, 2018
Fast free shipping a good quality parts I have recommended all my customers to buy from 1aauto.com and sure they do if I could give this more then a 5 start I would great job guys!
Great product
October 14, 2020
This is the second time I've purchased these roters and pads and I'm amazed at the quality and the price. I've got my SUV that needs new rotors and brakes soon and I'm definitely getting this brand and set up again. They are of GREAT QUALITY & just smooth and super responsive and quiet.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Honda Accord Acura TSX Rear Ceramic Performance Brake Pad & Rotor Kit TRQ Performance BKA12091-1APBS00068 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.