MNSTS00573-Honda Accord Acura TL Rear Driver or Passenger Side Strut & Spring Assembly


Honda Accord Acura TL Rear Driver or Passenger Side Strut & Spring Assembly Monroe Quick-Strut 171372

Save 39%
List: $237.95 Save: $93.00
Only 4 left in stock
Part MNSTS00573
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Monroe Quick-Strut
Brand #: 171372

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Rear Seat (0:28)
    • Pull out on the T-handle on either side and pull the seat up
    • Remove the 10mm bolt from the seat on each side pillar
    • Insert the key to the lock to unlock the seat
    • Lay the back seat down
    • Remove the side pillar on each side
    • Unclip the black seat trim from the plastic tabs
    • Remove the two nuts from the strut tower mounting bolts (not the spring-loaded center bolt)
  2. step : Removing the Wheel (2:53)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  3. step : Removing the Rear Strut (3:45)
    • Loosen the bottom 17mm nut from the strut
    • Remove the 17mm bolt
    • Remove the 14mm bolt from the upper sway bar link bracket
    • Set the bracket to the side
    • Pry the shock down and out with a pry bar
  4. step : Installing the Rear Strut (6:09)
    • Remove the two upper nuts from the strut
    • Using a pry bar, set the rear strut into place
    • Place the upper nuts on by hand
    • Tighten the upper nuts with a 15mm socket and ratchet
    • Torque the bolts to 37 foot-pounds
    • Insert the lower end of the strut into place and put the bolt in by hand
    • Tighten the 17mm lower bolt to the bottom of the strut
    • Tighten the 14mm bolt to the upper sway bar link bracket
    • Torque the bottom strut bolt to 43 foot-pounds
  5. step : Reinstalling the Seat (11:42)
    • Reinstall the top black trim to the back seat
    • Clip the pillar trim to both sides
    • Tighten the 10mm bolt to the trim on both sides
    • Press the back into place
    • Line up the seat belts and snap the bottom of the seat in on both sides
  6. step : Reattaching the Wheel (13:48)
    • Slide the wheel into place
    • Start the 19mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 17mm Socket
  • 19mm Socket
  • 10mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2004-2006Acura TL Acura TL Rear Driver or Passenger Side Strut & Spring Assembly
2003-2007Honda Accord Honda Accord Rear Driver or Passenger Side Strut & Spring Assembly

Part Interchange

Brand Label Part Number
DIY Solutions SHO04175

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Monroe Quick-Strut
Brand #: 171372
Product Reviews
There are no reviews for this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Honda Accord Acura TL Rear Driver or Passenger Side Strut & Spring Assembly Monroe Quick-Strut 171372-MNSTS00573 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.