1ASSP00418-Honda Accord Acura TL Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set

Replaces

Honda Accord Acura TL Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set TRQ SCA57029

1ASSP00418

Part Details

  • Set Quantity: 2 Piece

This part replaces:

  • Monroe 171372
  • KYB SR4132
FREE SAME DAY SHIPPING
Save 27%
List: $204.95 Save: $55.00
Part 1ASSP00418
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: SCA57029

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Set Quantity:   2 Piece

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Rear Seat (0:28)
    • Pull out on the T-handle on either side and pull the seat up
    • Remove the 10mm bolt from the seat on each side pillar
    • Insert the key to the lock to unlock the seat
    • Lay the back seat down
    • Remove the side pillar on each side
    • Unclip the black seat trim from the plastic tabs
    • Remove the two nuts from the strut tower mounting bolts (not the spring-loaded center bolt)
  2. step : Removing the Wheel (2:53)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  3. step : Removing the Rear Strut (3:45)
    • Loosen the bottom 17mm nut from the strut
    • Remove the 17mm bolt
    • Remove the 14mm bolt from the upper sway bar link bracket
    • Set the bracket to the side
    • Pry the shock down and out with a pry bar
  4. step : Installing the Rear Strut (6:09)
    • Remove the two upper nuts from the strut
    • Using a pry bar, set the rear strut into place
    • Place the upper nuts on by hand
    • Tighten the upper nuts with a 15mm socket and ratchet
    • Torque the bolts to 37 foot-pounds
    • Insert the lower end of the strut into place and put the bolt in by hand
    • Tighten the 17mm lower bolt to the bottom of the strut
    • Tighten the 14mm bolt to the upper sway bar link bracket
    • Torque the bottom strut bolt to 43 foot-pounds
  5. step : Reinstalling the Seat (11:42)
    • Reinstall the top black trim to the back seat
    • Clip the pillar trim to both sides
    • Tighten the 10mm bolt to the trim on both sides
    • Press the back into place
    • Line up the seat belts and snap the bottom of the seat in on both sides
  6. step : Reattaching the Wheel (13:48)
    • Slide the wheel into place
    • Start the 19mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 17mm Socket
  • 19mm Socket
  • 10mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do this go on the back ?
Rubelsy S November 15, 2015
Hello. Absolutely. These are for the rears only. Specifications: Comes as a PAIR Fits both LH (Driver Side) & RH (Passenger Side) REAR
Brian F November 24, 2015
Yes
Armingo A February 18, 2016
What brand are the struts?
Lee E March 5, 2017
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Tim K March 6, 2017

Fits the following Makes:

Year Make Model Description
2004-2008Acura TL Acura TL Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set
2003-2004Honda Accord Honda Accord Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set
2005-2007Honda Accord Honda Accord Value Package Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set
2005-2007Honda Accord Honda Accord Special Edition Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set
2005-2007Honda Accord Honda Accord LX Special Edition Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set
2005-2007Honda Accord Honda Accord SE Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set
2005-2007Honda Accord Honda Accord LX Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set
2005-2007Honda Accord Honda Accord EX-L Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set
2005-2007Honda Accord Honda Accord EX Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set
2005-2007Honda Accord Honda Accord DX Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set

Part Interchange

Brand Label Part Number
KYB SR4132
KYB Shocks & Struts SR4132
Monroe 171372
Monroe Shocks & Struts 171372
Unity Automotive 15050

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: SCA57029
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Honda Accord strut & spring assembly pair
Great genuine parts. Perfect replacement to my old ones. Easy as swapping the old parts for the new ones. I deafly recommend 1AAuto to everyone
August 21, 2018
Very good product
This Strut and spring assembly pair fit my 2004 Acura TL very well, making the rides feel like brand-new again. Extremely happy with the price too. I highly recommend it to everyone.
January 5, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Honda Accord Acura TL Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set TRQ SCA57029-1ASSP00418 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.