Headlight Switch Standard Motor Products - 1AZHS00005

Specifications:

• Fits vehicles with standard/analog dash
  • Does NOT fit cars with Electronic Dash
• Plunger Pull-Push Style
• Proper rheostat for dash and interior light dimming
• Dash Mount
• Direct replacement
• No cutting or splicing necessary
• Built to strict quality control standards
• 10 Terminal Switch (has one terminal used as a ground)

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

step : Disconnect your battery (1:08)

• Disconnect your negative battery terminal

step : Remove the headlight switch (1:10)

• Reach up under the dash and press the button on the switch to pull the plunger out.
• Pull down the AC duct and remove all the screws in the dash trim.
• Remove the threaded washer over the switch.
• Unplug the switch.

step : Install the new headlight switch (5:00)

• Plug in the new headlight switch.
• Replace the threaded washer.
• Replace the dash trim and the duct work under the dash.
• Put the headlight switch plunger back into place.