Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • LH (Driver Side)
  • Includes lens & housing
  • Includes integrated parking/marker lamp
  • Headlight Adjusters are not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Handling the Bulbs (0:31)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Remove the old headlight assembly (0:35)
    • Pop the hood and secure it.
    • Remove the two 7 mm bolts with a socket, ratchet and extension.
    • Unclip the 3 pushclips securing the fascia around the head light assembly.
    • Remove the head light assembly.
    • Unplug the bulbs and harness.
  3. step : Install the new headlight assembly (3:17)
    • Plug in your bulbs, replacing them with new ones if necessary.
    • Reconnect the harness by clipping it in.
    • Line up the head light assembly and clip it into place.
    • Bolt back in the two 7 mm bolts.
    • Clip the 3 push clips back into the front fascia.
    • Close the hood and enjoy your new 1A Auto headlights.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 7mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
2001 Sebring 4-door sedan
I recommend. Delivery was fast and tracking convenient. Did left side head light. Good fit. Front Fascia: Did have to take out the center push pin fasteners and two screws at LS wheel well to lower fascia and install HL. After that it was just electrical connectors and 2 mounting bolts. Mounts like OEM.
December 11, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2003Chrysler Sebring Chrysler Sebring 4 Door Sedan Headlight Driver Side
2001-2003Chrysler Sebring Chrysler Sebring Convertible Headlight Driver Side
2001-2006Dodge Stratus Dodge Stratus 4 Door Sedan Headlight Driver Side
Part #: 1ALHL00090


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:22 min)