This head gasket set is just the kit you need when you are planning to rebuild or replace your cylinder heads. The set contains all the gaskets needed to reassemble the top end of your engine and bring it back to new status!

Each gasket in this set has the following specifications:

  • Made from high quality materials
  • Heat resistant
  • Oil resistant
  • Direct replacement
  • Built to strict quality control standards

 

This head gasket set contains the following pieces:

  • Graphite head gaskets - Qty (2)
  • Intake manifold gaskets - Qty (2)
  • Exhaust manifold gaskets - Qty (2)
  • Valve cover gaskets - Qty (2)
  • Viton valve stem seals
  • Grommets
  • Camshaft Seal
  • Miscellaneous other gaskets

Note: Since this kit may fit different applications, there may be some gaskets left over after the rebuild.

 

 

Warranty

Please inspect this part carefully prior to installation and contact us with any questions BEFORE attempting to install it. Due to the nature of this part, our 60-day warranty covers exchanges only. Parts that have been installed, neglected, or modified in any way are not eligible for this exchange.

4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
1
0
0
Great Kit! Saves a lot of $$$$
The kit is great...very complete! Would be nice if gave better placement/usage details on the separate bags. But it really saved me money doing it all myself!
June 13, 2016
Purchased
over 3 years ago
Worked fine
Installed and worked as expected. Arrived in a timely manner. Cost was good
February 20, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 26 answers
I'm going to be replacing my fuel injectors, and my mechanic asked me to get the o rings and gaskets. Does this kit include all that?
ErikKid on Jun 25, 2016
BEST ANSWER: Yes...however if the o rings and and gasket is all ur replacing u dont need the entire head gasket set unless your replacing those too i would try to get just what you need for the job
why should the head bolts be replaced??
midwestfred on Jan 16, 2016
BEST ANSWER: The head bolts aren't really a necessity, but if you were changing a gasket that low such as the head gasket, it's a good idea since you're already that deep in the engine. The wear and stress on the engine overtime will eventually stretch the bolts out and COULD develop a small gap which would give the same symptoms of a blown head gasket. But yes, the bolts do stretch overtime.
Installation instructions?
Mike B on Jun 11, 2016
BEST ANSWER: Mike if your question is does the kit have instructions the answer is no. The procedure to replace all gaskets and seals is a long multi-stepped process. There are videos online as well as instructions and torx specs in books put out by chilton which may be available at your local library. My suggestion is to photograph, diagram and mark items as you disassemble. Have the torx specs for every bolt ready ahead of time and be sure to hand the project over to a professional if you do not have each step clear before you start. Keep things even if they will be replaced together so you can make sure everything is put back in the proper location. Good luck! Plan for it to take you a few days to complete.
Every time I get in my car, after it has sat overnight or if I had driven it for awhile that day, I will have to continue to put anti-freeze in the radiator/reservoir before I could drive it? What could the cause be for this problem?
Karen B on Mar 21, 2018
BEST ANSWER: We are unable to diagnose your problem, because there could be multiple reasons why you're experiencing this particular difficulty. We suggest you take your vehicle to a reputable shop close to you to identify the problem. Once you know the cause of your problem please feel free to call us toll free at 888-844-3393. We'll be happy to see if we carry the parts needed for the repair.
I noticed on the factory head gasket it says "This side up." Which side of the head gasket faces up?
Brandon M on Feb 15, 2017
BEST ANSWER: In order for all of the bolts to match the holes it will only fit one way
Do you have a head gasket set for an 06 Equinox?
Chelsea G on Jun 19, 2017
BEST ANSWER: We do not have the head gasket set for the 2006 Equinox currently.
Is the 05 chevy equinox ls awd 3.4l engine the same as the 06 chevy equinox ls awd 3.4l engine?
Leeroy G on Mar 6, 2017
BEST ANSWER: It appears there will be slight differences between the 2005 model 3.4L engine, and the 2006 model 3.4L engine that would disqualify this set from working on the 2006 model.

Vehicle Fit

  • 2000-2005 Buick Century Head Gasket Set V6 3.1L
  • 2002-2005 Buick Rendezvous Head Gasket Set V6 3.4L
  • 2005 Chevy Equinox Head Gasket Set V6 3.4L
  • 2000-2005 Chevy Impala Head Gasket Set V6 3.4L
  • 2000-2001 Chevy Lumina Head Gasket Set V6 3.1L
  • 1999-2003 Chevy Malibu Head Gasket Set V6 3.1L (8th Vin Digit J)
  • 2000-2005 Chevy Monte Carlo Head Gasket Set V6 3.4L
  • 1997-2005 Chevy Venture Head Gasket Set V6 3.4L
  • 1999-2004 Olds Alero Head Gasket Set V6 3.4L
  • 1999 Olds Cutlass Head Gasket Set V6 3.1L (8th Vin Digit J)
  • 1996-2004 Olds Silhouette Head Gasket Set V6 3.4L
  • 2001-2005 Pontiac Aztek Head Gasket Set V6 3.4L
  • 1999-2005 Pontiac Grand Am Head Gasket Set V6 3.4L
  • 2000-2003 Pontiac Grand Prix Head Gasket Set V6 3.1L
  • 1999-2004 Pontiac Montana Head Gasket Set V6 3.4L
  • 1996-1998 Pontiac Trans Sport Head Gasket Set V6 3.4L
Part #: 1AEGS00091

Ships Same Day for orders placed by 4 P.M. ET