This replacement Tail light is just what you need to get your Envoy in good looking form again!

Specifications:

  • LH (Driver Side)
  • Replaces dealer part number: 15131576
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Built to strict quality control standards
  • Red and Amber in color as original

We have noticed that there are many inferior quality Tail lights on the market. We have researched other Tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket Tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Envoy Tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight (0:38)
    • Open the lift gate
    • Remove the two Phillips screws from the taillight bracket
    • Disconnect the headlight wiring harness
  2. step : Servicing the Bulbs (1:03)
    • Remove the three Phillips screws from the circuit board
    • Pull the circuit board out
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Push the bulb onto the socket
    • Push the circuit board into the light
    • Insert and tighten the three Phillips screws into the circuit board
  3. step : Installing the New Taillight (2:00)
    • Push in the tabs on the plate on the old taillight and remove it
    • Connect the plate to the new taillight
    • Reconnect the wiring harness to the taillight
    • Line up the bolt holes on the taillight bracket to the bolt holes on the vehicle
    • Replace the two Phillips screws into the taillight bracket

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
As agreed !
All my life, 78 years, I have considered a good deal was when both parties performed as agreed, This was good merchandise--at a fair price--shipped immediately . Every thing was as agreed--thank you .
July 31, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2009 GMC Envoy Tail Light Driver Side
  • 2002-2006 GMC Envoy XL Tail Light Driver Side

This part replaces:

  • Partslink GM2800171
  • Hollander 166-01962L
  • OE # 15131576
  • DEPO 335-1927L-UF
Part #: 1ALTL00375

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:15 min)