Replaces

Ford Upper Intake Manifold DIY Solutions

Description
Vehicle Fit
Warranty & Shipping
Q&A

Part Details

  • Design:   1 Piece Design

Specifications:

  • One piece design
  • Reinforced aluminum coolant crossover - eliminates failure due to corrosion or vibration
  • Re-engineered reinforced plastic
  • Intake gaskets molded into the intake manifold
  • Fits the following Ford engines as listed per application:
    • V8 5.4L SOHC

Kit includes:

  • Complete improved intake manifold with new aluminum crossover
  • New thermostat, o-ring, and screws
  • Everything needed to do the job right the 1st time

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
USA made?
Frank R August 23, 2017
These are built in either Taiwan or China.
Alex P August 25, 2017
Why is the lower manifold so much smaller then oem version? Will that decrease my trucks performance?
Will F September 24, 2017
You will not encounter a decrease in the trucks performance. Our vendors created an upgraded design due to common failure points on the OE design, but made them to exceed the OE style specifications.
Alex P September 25, 2017
It will not change the performance. It looks smaller because the aftermarket one comes as the full unit and deleted casing that the oem one sat in. Just sets right in, and also deleted the need to have to take out the entire middle to get to it.
Justin J September 25, 2017
No u will get the same performance that the truck always gat. I was concerned about that also when I bought mine but after putting it on and seeing it work I got the same performance that I got with the OEM version
Lemuel A September 25, 2017
Do I remove the old gasket thats stuck on the cylinder head and then just bolt this unit straight on the head?
Robert B February 14, 2018
Thanks for your question! You will want to completely remove and clean the mounting surfaces to allow the new gasket to seal properly. Thank you!
Adam G February 15, 2018
yes and there are great u tube videos just type in how to replace a ford intake manifold there one that a ford guy take you throw the hole job
Jeffery K February 16, 2018
Remove old gaskets, clean mounting surface. Unit has gaskets manufactured in. Then just bolt in place
V R April 6, 2018
Will that fit a 4.6 V8?
R M May 3, 2018
No this will not fit a 4.6L engine.
Tim K May 3, 2018
Will this fit a 2004 F150 5.4 3V?
Jason M July 25, 2018
This is only listed to fit 2004 Ford F-150 Heritage Models. It will not fit your vehicle if it is not a Heritage Model.
Christa R July 25, 2018
Does this set come with the intake gaskets as well with the crossover gaskets?
Armando V October 16, 2019
Yes it does. The gaskets are built into the manifold and crossover. I installed this intake manifold on a 2001 Ford Expedition a couple years ago and have had no issues with it.
Techie T October 17, 2019
This will come with the intake manifold gaskets already molded on. Please let us know if you have any further questions.
Emma F October 17, 2019
How ft. Lbs. Of torque is recommended?
Ken B March 19, 2020
Tighten intake bolts as follows: Stage One: 2 Nm (18 in-lbs) Stage Two: 25 Nm (18 ft-lbs) an answer to this question.
Brittanua C March 19, 2020
Thanks for your inquiry. Written and video installation instructions are found on the product page under the "How-To & Tools" tab. Were constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: https://www.1aauto.com/videos
Emma F March 19, 2020
The part that the PVC hose hook to on the back of the intake do you sell it separate from the intake?
Clayton L April 18, 2020
Currently, we do not carry this part you are looking for. Were always updating our inventory so please check back soon! If you have any other questions, let us know.
Jessica D April 18, 2020
Why Im constantly being shown intake for 5.4l when Im asking for 4.6l?are they compatible?
Sean W April 19, 2020
Thank you for your inquiry! No, this item is not compatible with the 4.6L engine. If you would like us to see if we offer the correct intake manifold please contact back wit your year make and model so we can further assist you, thank you.
Jessica D April 19, 2020

Fits the following Makes:

Year Make Model Description
2000-2003Ford E150 Van Ford E150 Van V8 5.4L SOHC Upper Intake Manifold
2004-2014Ford E150 Van Ford E150 Van V8 5.4L Upper Intake Manifold
2000-2003Ford E250 Van Ford E250 Van V8 5.4L SOHC Upper Intake Manifold
2004-2014Ford E250 Van Ford E250 Van V8 5.4L Upper Intake Manifold
2000-2003Ford E350 Van Ford E350 Van V8 5.4L SOHC Upper Intake Manifold
2004-2005Ford E350 Van Ford E350 Van V8 5.4L Upper Intake Manifold
2000-2003Ford E350 Van Super Duty Ford E350 Van Super Duty V8 5.4L SOHC Upper Intake Manifold
2004-2014Ford E350 Van Super Duty Ford E350 Van Super Duty V8 5.4L Upper Intake Manifold
2000-2003Ford E450 Van Ford E450 Van V8 5.4L SOHC Upper Intake Manifold
2004-2014Ford E450 Van Ford E450 Van V8 5.4L Upper Intake Manifold
2000-2005Ford Excursion Ford Excursion V8 5.4L Upper Intake Manifold
2000-2004Ford Expedition Ford Expedition V8 5.4L Upper Intake Manifold
2010Ford Expedition Ford Expedition V8 5.4L Upper Intake Manifold
2004Ford F150 Heritage Truck Ford F150 Heritage Truck (excluding Lightning Models) V8 5.4L SOHC Upper Intake Manifold
2000-2003Ford F150 Truck Ford F150 Truck (excluding Lightning Models) V8 5.4L SOHC Upper Intake Manifold
2000-2004Ford F250 Super Duty Truck Ford F250 Super Duty Truck V8 5.4L SOHC Upper Intake Manifold
2000-2004Ford F350 Super Duty Truck Ford F350 Super Duty Truck V8 5.4L Upper Intake Manifold

Part Interchange

Brand Label Part Number
DIY Solutions ENG00295

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1AEIM00023
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: ENG00295