Replaces

Ford Taurus Mercury Sable Steering & Suspension Kit - 1ASFK03459

Part Details

  • Quantity: 12 Piece Set
  • Kit Includes:
    (2) Front Lower Ball Joints
    (2) Front Outer Tie Rods
    (2) Front Sway Bar Links
    (2) Steering Rack & Pinion Bellows
    (2) Front Inner Tie Rods
    (2) Rear Sway Bar Links

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove Wheel (2:25)
    • Remove lug nuts and remove wheel.
  2. step : Remove tie rod (2:37)
    • Remove cotter pin.
    • Use your tie rod puller to pull the tie rod up.
    • Use your two adjustable wrenches to remove the tie rod.
  3. step : Install new tie rod (5:30)
    • Use the old nut to mark the bolt with tape.
    • Use a vice grip and an adjustable wrench to remove the nut, using penetrating oil if need be.
    • Replace bolt with new one, compensating for any difference in width.
    • Use your two adjustable wrenches to tighten the nut up against the tie rod end.
    • Use your torque wrench to tighten up the nut on the end of the tie rod and put the cotter pin in.
    • Put the grease fitting in.
    • Use grease gun to fill boot with grease.
  4. step : Put wheel back on (9:48)
    • Use the star pattern to tighten the lugs to 90 to 100 ft lbs.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Puller
  • Vise-Grips

  • Wrenches - Metric

  • 8mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Everything fit very well
Everything fit very well and for the price you most definitely can't beat it hopefully everything functions like it should this was my first purchase and I most definitely be a return customer
June 15, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1996-1999Ford Taurus Ford Taurus (excluding SHO Models) Steering & Suspension Kit 12 Piece Set
2000-2007Ford Taurus Ford Taurus Steering & Suspension Kit 12 Piece Set
1996-2005Mercury Sable Mercury Sable Steering & Suspension Kit 12 Piece Set

This part replaces:

  • Moog K8465
  • Moog K3124
  • Moog K8687
  • Moog K8734
  • Moog K8735
  • Moog ES3349RL
  • Moog EV398
  • OE # E69Z3332A
  • OE # E7FZ3332A
Part #: 1ASFK03459


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:21 min)