1AFMX00020-Ford Taurus Mercury Sable Fuel Tank Filler Neck


Ford Taurus Mercury Sable Fuel Tank Filler Neck DIY Solutions


This part replaces:

  • Dorman 577-910
  • Hollander 179.FDTA9905
  • Spectra Premium Industries TNKFN591
  • OE # YF1Z 9034 FB
  • DIY Solutions TAN00413
Save 36%
List: $85.95 Save: $31.00
Part 1AFMX00020
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: TAN00413

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools


  • Direct replacement
  • Built to strict quality control standards
  • Replaces any gas tank filler neck that is rusted, rotted, bent, or damaged from an accident
  • Fits SEDAN MODELS WITHOUT the On board Vapor Recovery System (OVRS)

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Disconnecting the Fuel Filler Neck at the Fuel Door (1:05)
    • Open the fuel door
    • Take off the fuel cap
    • Remove the three 10mm bolts from the fuel filler neck
    • If the bolts will not come off leave them to be tightened into the new neck later
  2. step : Removing the Filler Neck (1:55)
    • Loosen the 8mm bolt from the larger fill tube clamp
    • Loosen the 8mm bolt from the smaller fill tube clamp
    • Pry the smaller rubber hose off the filler neck with a flat blade screwdriver
    • Remove the 10mm bolt that holds the filler neck to the vehicle body
    • Spray penetrating oil between the filler neck and the larger hose
    • Separate the filler neck from the rubber hose
    • Pull the filler neck off
  3. step : Connecting the New Filler Neck (4:20)
    • Feed the new filler neck into position.
    • Push the hoses on to the new filler neck
  4. step : Mounting the New Filler Neck (4:59)
    • Holding the filler neck in place, tighten the top two 10mm bolts into the new filler neck
    • Put the fuel cap lanyard under the third bolt
    • Insert the third 10mm bolt
    • Twist on the fuel cap
    • Close the fuel door
    • Insert the 10mm bolt that holds the filler neck bracket to the body
    • Slide the hose clamps into position
    • Tighten the hose clamps using an 8mm socket

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1998-2007Ford Taurus Ford Taurus Sedan (excluding Flex Fuel) without Onboard Vapor Recovery System Fuel Tank Filler Neck
1998-2005Mercury Sable Mercury Sable Sedan (excluding Flex Fuel) without Onboard Vapor Recovery System Fuel Tank Filler Neck

Part Interchange

Brand Label Part Number
DIY Solutions TAN00413
Spectra Premium FN591

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

DIY Solutions
Brand #: TAN00413
Product Reviews
5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Fit well, quick delivery
Mine was badly rusted, the vent tube was rusted away. Found it difficult to position while trying to screw in the 3 screws behind the filler door, a 2nd set of hands would have helped. Wish they would supply new self tapping screws, the old ones were rusty and didnt seem to want to "bite" and self tap in.
October 14, 2017
Taurus Filler Tube
This item came quick, priced low and worked just fine.
February 22, 2018
Filler neck fit my 2002 Ford Taurus
The filler neck was an exact replacement for my Taurus
February 15, 2019
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Ford Taurus Mercury Sable Fuel Tank Filler Neck DIY Solutions-1AFMX00020 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.