This replacement tail light is just what you need to get your Ford Ranger Pickup truck in good looking form again!

This Ford tail light features the following specifications:

  • RH Passenger side
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality! Assembly consists of the combination lens with reverse light, and housing.

This Ford Ranger Pickup tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:46)
    • Remove the four screws securing the taillight.
    • Pull the taillight out.
    • Twist out the lower socket.
    • Push in the thumb and pull off the connector.
    • Twist out the upper socket.
    • Bulbs can be serviced at this time.
  2. step : Replacing the Taillight Assembly (1:38)
    • Twist in the upper socket.
    • Reconnect the harness.
    • Twist in the lower socket.
    • Line up the taillight assembly.
    • Push it into place.
    • Replace the four screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2004Ford Ranger Ford Ranger Tail Light Passenger Side
2005Ford Ranger Ford Ranger (excluding STX Models) Tail Light Passenger Side

This part replaces:

  • Partslink FO2801156
  • Hollander 166-1910R
  • TYC 11-5451-01-1
  • DEPO 330-1908R-UF
  • OE # 1L5Z 13404 BA
Part #: 1ALTL00270


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:09 min)