Ford Mercury Heater Blower Motor with Fan Cage - 1AHCX00088

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This Ford & Mercury Mid Size SUV front blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following


  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 1L2Z 19834 AA, 1L2Z 19834 AA, 1L2Z19834AA, 1L2Z19834AA, 1L5Z 18456 CA, 1L5Z18456CA, MM844, XL2Z 19805 EA, XL2Z 19805 EA, XL2Z19805EA, XL2Z19805EA
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • Gasket Is Included
  • Replaces the front blower motor on vehicles that have a front and rear unit

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Remove Servo Motor (1:01)
    • Remove the servo motor using a 10mm socket or wrench.
    • Set the Servo Motor aside.
  2. step : Remove air box (1:26)
    • Undo the clips on each side of the air box and move it out of the way.
    • Lift the filter up and out.
    • Lift the airbox up firmly and use a screwdriver to pop out the clips.
    • Pull the airbox out towards the center of the car.
    • Set it aside.
  3. step : Unbolt the Radiator bottle and washer fluid bottle (3:26)
    • Remove the 4 nuts and bolts that hold the washer and radiator bottles in place.
    • Use your 11 mm socket on the nuts and 10mm socket on the bolts.
    • Move the Radiator and Washer fluid bottles to the side.
  4. step : Remove the blower motor (4:13)
    • Disconnect the wiring harness.
    • Remove the tube connected to it.
    • Remove the four 8mm bolts securing the blower motor.
    • Pull the motor out.
  5. step : Install your new blower motor (5:03)
    • Move the rubber boot out of your way and put the blower motor into its housing.
    • Line up the blower motor onto the pins in its seating.
    • Bolt the 8mm bolts back in with your socket and ratchet.
    • Replace the rubber boot/tube by putting the rubber band part back into place.
  6. step : Re-install the Radiator and Washer Fluid Bottles (7:15)
    • Bolt the 4 nuts and bolts back int.
  7. step : Re-install the Airbox (7:50)
    • Push the pins into the fender to secure it in place.
    • Put your air filter back into the air box.
    • Clip the top of the airbox back on.
  8. step : Reinstall the Servo Motor (8:52)
    • Bolt it back in with your 10mm socket and ratchet.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket
  • 11mm Socket

5.00/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Worked Great!
Part worked Great, Shipped Quickly and with the install Video I was able to install with minimum work.. Thanks
February 2, 2017
As promised
Ordered, delivered, installed.... Installation videos are great, prices are the same or even lower than local auto stores. Delivery was by UPS, but was transferred to Post office, not sure why maybe my area still delivery was easy to track. I will do all my basic car parts shopping and installing from 1aauto.
February 26, 2017
Good service
I will bereturning the part as it is not needed. Please send an RA number via email. Thank you
July 2, 2017
Works great
installation was simple. Fan worked great. Delivery was fast.
August 11, 2017
Replacement blower motor
Arrived package well with no damage. Relatively easy to install and works great. Price was better than local auto parts stores and included the fan cage.
September 13, 2017
The video was perfect and so was the part. Thank you!
November 5, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1995-2000Ford Explorer Ford Explorer Front Heater Blower Motor with Fan Cage
2001Ford Explorer Ford Explorer Front Heater Blower Motor with Fan Cage
2001-2005Ford Explorer Sport Trac Ford Explorer Sport Trac Front Heater Blower Motor with Fan Cage
1998-2011Ford Ranger Ford Ranger Heater Blower Motor with Fan Cage
1997-2001Mercury Mountaineer Mercury Mountaineer Front Heater Blower Motor with Fan Cage
Part 1AHCX00088
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.