Ford Mazda Rear Brake Kit DIY Solutions

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Kit Includes:
      (2) Rear Brake Wheel Cylinders
      (1) Rear Brake Shoe Set
      (1) Rear Brake Hardware Kit
      (2) Rear Brake Drums

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (1:00)
    • Pry off the center cap with a flat blade screwdriver
    • Remove the wheel lock lug nut with a wheel lock key
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Drum (1:50)
    • Pull off the drum
    • Tap around the edges and in between the studs if necessary
    • Remove the wheel on the opposite side
  3. step : Removing the Brake Shoes (2:32)
    • Remove the upper brake shoe springs with the vise grip pliers
    • Remove the e-brake cable eyelit
    • Remove the upper plate from the pin
    • Remove the springs and rocker plate the rest of the way
    • Remove the left brake shoe spring with the vise grip pliers
    • Twist off the pin with the vise grip pliers
    • Remove the left brake shoe
    • Twist off the rear retaining spring with the vise grip pliers
    • Twist off the pin with the vise grip pliers
    • Pry the emergency brake cable out of the brake shoe
  4. step : Removing the E-brake Actuator (5:04)
    • Remove the adjustor
    • Remove the spring
    • Pry off the horseshoe clip with pliers
  5. step : Installing the E-brake Actuator (7:30)
    • Insert the spring washer onto the brake shoe
    • Insert the horseshoe clip to the e-brake
    • Crimp the ends of the horseshoe clip
    • Install the spring and adjustor to the shoe
  6. step : Installing the New Brake Shoes (8:37)
    • Clean the backing plate friction points with a wire brush
    • Apply white grease to the friction points
    • Lift the left brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Install the spreader bar with the spring facing the right brake shoe
    • Put the right brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Push the brake shoes together by hand
    • Insert the plate into place
    • Insert the pivot to the brake shoe hole and hook the longer spring to it
    • Connect the eyelit
    • Hook the longer springs on with the vise grip pliers
  7. step : Installing the New Brake Drum (12:40)
    • Try to slide the brake drum on
    • If necessary turn the adjuster wheel with a flat blade screwdriver
    • The brake rotor should slide on with some resistance
  8. step : Reattaching the Wheel (13:44)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1998-2009Ford Ranger Ford Ranger with 10 Inch Drums Rear Brake Kit
2001-2009Mazda B2300 Truck Mazda B2300 Truck with 10 Inch Drums Rear Brake Kit
1998-2001Mazda B2500 Truck Mazda B2500 Truck with 10 Inch Drums Rear Brake Kit
1998-2007Mazda B3000 Truck Mazda B3000 Truck with 10 Inch Drums Rear Brake Kit
1998-2009Mazda B4000 Truck Mazda B4000 Truck with 10 Inch Drums Rear Brake Kit

Part Interchange

Brand Label Part Number
Aimco 8989
Aimco 8923
Bendix PDR0391
Bendix PDR0697
Bendix PDR0810
DIY Solutions BFS00837
DIY Solutions BFS01533
DIY Solutions BFS01159
DuraGo BD8923
Raybestos Brakes 9498
Raybestos Brakes 2687
Wagner BD126367
Wagner BD180201
Wagner BD125710
Wagner BD125134

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Product Reviews
4.70/ 5.0
10 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Excellent value!
Excellent value! Good quality parts worked great!Saved quite a bit of money purcashing this. Also came in 3 days!
March 31, 2017
rear brake kit 2004 ranger 2wheel drive
i will recommend this to all my friends .great service and arrived 3business days complete.
November 1, 2017
Outstanding parts
Outstanding quality Parts with short wait time is why I would refer 1A Auto too anyone in need some good quality parts
May 9, 2018
Amazing Set
I bought this brake set and watched along with the videos on YouTube. Everything was very clearly stated and all the parts were there. This was the first time I had ever replaced drum brakes, but 1AAuto made it much less stressful. All the parts were brand new and looked great and my brakes feel much better!
October 25, 2018
Great fitting parts.
Even though 1 rotor was nit correct, A1 customer support replaced with proper item and my repair was done with 100% success.
November 11, 2018
My latest purchase
To date, I have been VERY pleased with all items purchased form 1A Auto. They have given me QUALITY parts and QUALITY service when called upon.
March 13, 2019
Easy complete product
The brake drum kit fit perfectly to my vehicle. It had all the necessary pieces to complete the job. The 1AAuto video made install a breeze! Thank you!
September 6, 2019
Parts list
Everything was what I needed, except the two wheel cylinders were wrong ones ,they were for nine inch hubs my truck was ten inch hubs so brake lines wouldnt screw in ,treads was to small, so I had to buy two more 29:00 dollars
December 27, 2019
Complete kit!
Great brake kit to replace OEM parts. Good springs & Everything bolted on easily, and so nice to have smooth rear end again!
January 20, 2020
Complete rear brakes
Fit 2001 Ford Ranger Edge 4 x 4
March 14, 2020
Part 1ABFS02561

Out of Stock

DIY Solutions
Brand #: BFS00837