Replaces

Ford Mazda Mercury Steering & Suspension Kit 10 Piece Set TRQ PSA58980 - 1ASFK02616

Click Here to Select Your Vehicle and Verify Fit
1995-02 Ford Mercury Pickup SUV Front Steering & Suspension Kit (10 Piece)

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   10 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Upper Control Arms with Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering and Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the Wheel (1:59)
    • Pull off the center cap
    • Loosen the lug nuts
    • Remove the cotter pin and loosen the 35mm hub nut
    • Loosen the seven 13mm 12-point bolts that hold the axle to the front drive
    • Raise and secure the car
    • Remove the wheel
  2. step : Loosen the Torsion Bar (2:54)
    • Spray the torsion bar with spray paint and loosen the torsion bar tension bolt with an 18mm bolt
  3. step : Remove the Tie Rod (3:45)
    • Use a pair of pliers to remove the cotter pin
    • Remove the nut at the end of the tie rod
    • Use a tie rod puller to separate the tie rod
  4. step : Remove the stabilizer links (5:25)
    • Use a 9/16 wrench to secure the bottom and a 14 mm socket to unbolt the stabilizer link
    • Use a hammer and punch to remove the stabilizer link
  5. step : Pull the Axle from the CV Joint (6:52)
    • Unbolt the seven bolts, using a pry bar to keep the hub from rotating
    • Remove the hub nut using a 35 mm socket
    • Give the axle a tap with a hammer and pull the axle out
  6. step : Remove the Ball Joint (9:00)
    • Use a jack and wood plank or two to lift the control arm and relieve tension from the ball joint
    • Unbolt the the ball joint using a breaker bar and 27mm socket
    • Use a ball joint removal tool to pull the ball joint apart
    • With a ball joint press, remove the ball joint completely
    • See Part Two for reassembly

Tools needed for replacement:

    General Tools

  • Center Punch
  • Floor Jack
  • Hammer
  • Jack Stands

    • Materials, Fluids, and Supplies

  • Block of Wood
  • Marker / Writing Utensil
  • Rust Penetrant

    • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

    • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions

    • Screwdrivers & Related

  • Pry Bar

    • Sockets - Metric

  • Complete Metric Socket Set

    • Specialty Tools

  • Ball Joint Press
  • Tie Rod Puller

4.17/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
1
2
0
0
Front Suspension Kit for 2003 Ford Ranger with 2wd and Torsion Bars
The kit was complete, relatively easy to install and gave my suspension a new-like feel.
July 30, 2017
All good except........
All parts except the inner tie rod ends were correct and fit perfectly. Your inner tie rods were the wrong part for my vehicle, found that out while I had the car up and taken apart so I had no choice but to run to the local parts store for correct parts and added cost.
October 14, 2017
Good product for the price point. Flawless transaction. Wouldve been cooler if anything had grease fittings instead of being sealed. However, id buy again if i was in a non performance application, no questions.
December 17, 2017
Perfect
They are the best! Good quality parts right at your door super fast! Good quality people ready to help
December 29, 2017
All but one...
The price was right for the kit, but one of the outer tie rods had to be replaced at a local parts store. It was obviously loose when I installed it - could be moved by hand - easily.
April 18, 2018
A great experience
This was my first major purchase from 1A Auto. Fast delivery, I ordered the wrong parts, contacted customer service via email. They understood my mistake and handled the return/refund with great professionalism. I ordered the correct parts which arrived within a few days. Excellent suspension parts!! Thank you 1A Auto customer service team for a very positive interaction. I will purchase from your company again in the future
February 1, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
for sport ? cause i know some are not.
Destiny C February 9, 2017
I put mine on a 2000 Ford Explorer SLT. Its a base model 4 dr. Im not sure if the Sport Model is the same, youd need to take a look under the vehicle. This is not for a 4wd though. I purchased this kit, and a set of shocks, and that pretty much rebuilt the entire front end suspension.
David T February 9, 2017
We would be more than happy to assist you. Please provide the year of your Ford Explorer Sport so we may identify direct fit replacements.
Alex P February 14, 2017
Will this fit on a 21001 Ford Explorer xlt awd? Would like to know which suspension control arm kit would fit best?
Kennethia R June 13, 2017
This kit will be correct for your 2001 Explorer as long as you have the 2-piece design passenger side control arm. This kit includes the outer RH control arm.
Tim K June 13, 2017
Is this for a 1998 ford ranger 4x4?
Mathew G July 7, 2017
Sorry Matt Im not sure I have a 2000 Ford Explorer. I no these parts did work on a Ranger but not sure of the year . Good luck
Gregory W July 7, 2017
yes correct fit
Robert N July 7, 2017
no
Thomas M July 7, 2017
I believe so. However,I used that for 98 Explorer 4WDEnter
Zdenek Z July 7, 2017
Yes, as long as you have the front torsion bar suspension and a two piece passenger side upper control arm.
Alex P July 7, 2017
Year Make Model Description
1998-2001Ford Explorer Ford Explorer with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
2001-2005Ford Explorer Sport Trac Ford Explorer Sport Trac with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
1998-2011Ford Ranger Ford Ranger 4 Wheel Drive with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
2001-2005Ford Ranger Ford Ranger Edge Rear Wheel Drive with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
2006-2009Ford Ranger Ford Ranger Sport Rear Wheel Drive with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
1999-2001Mazda B2500 Truck Mazda B2500 Truck Rear Wheel Drive with 2 Piece Passenger Side Upper Control Arm with Front Torsion Bar Suspension Steering & Suspension Kit 10 Piece Set
1998-2007Mazda B3000 Truck Mazda B3000 Truck 4 Wheel Drive with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
1999-2000Mazda B3000 Truck Mazda B3000 Truck Troy Lee Rear Wheel Drive with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
2001-2007Mazda B3000 Truck Mazda B3000 Truck DS Rear Wheel Drive with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
1998-2008Mazda B4000 Truck Mazda B4000 Truck 4 Wheel Drive with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
1999-2000Mazda B4000 Truck Mazda B4000 Truck Troy Lee Rear Wheel Drive with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
2001-2003Mazda B4000 Truck Mazda B4000 Truck DS Rear Wheel Drive with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
2004-2008Mazda B4000 Truck Mazda B4000 Truck Rear Wheel Drive with 2 Piece Passenger Side Upper Control Arm with Front Torsion Bar Suspension Steering & Suspension Kit 10 Piece Set
1998-2001Mercury Mountaineer Mercury Mountaineer with 2 Piece Passenger Side Upper Control Arm Steering & Suspension Kit 10 Piece Set
1
Part 1ASFK02616
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA58980