Replaces

Ford Mazda Mercury Front Semi-Metallic Brake Kit

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Front Brake Rotor Diameter:   11.30 in. (287mm)
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

Brake Pad Specifications:

  • Premium Posi Semi-Metallic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Fits 5 Studs Wheels
  • 11.25" Diameter
  • Direct replacements
  • Fits Models with the following options:
    • 2WD (Two Wheel Drive)
    • Torsion Bar Suspension

 

Note:

The rotors do not include wheel bearings or seals.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove the wheel (1:07)
    • Pry off the lug nut cover
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and the tire.
  2. step : Remove the calipers (1:42)
    • Use your 1/2" socket and ratchet to remove the caliper bolts
    • Use a flat blade screwdriver or pry bar to compress the caliper pistons
    • Pry the caliper of the rotor.
    • Remove the two 15 mm caliper bracket bolts.
  3. step : Replace the rotor (4:21)
    • Pry off the grease cap.
    • Use your pliers to remove the cotter pin.
    • Remove the 27 mm nut.
    • Pull the rotor off.
    • Insert the outside bearing race.
    • Use your race installation tools to tap the race into place.
    • Install the interior race.
    • Apply bearing grease to the races.
    • Pack the interior bearing with bearing grease.
    • Use a paper towel to keep your race tools tidy and install the interior bearing.
    • Apply grease to the exterior race.
    • Clean the spindle and mount the rotor.
    • Install the exterior bearing and apply bearing grease.
    • Put the nut and washer on, and tighten it with your socket and ratchet to seat the bearing.
    • Spin the rotor and loosen the nut and then tighten it again.
    • Do this till the bearing is seated, then put the cotter pin through.
    • Replace the dust cap.
  4. step : Install the calipers (15:20)
    • Mount the caliper bracket and secure it with your 15 mm socket and ratchet
    • Torque these bolts to 80 ft lbs.
    • Compress the caliper with a C-Clamp
    • Apply anti-seize grease to the edges of the brake pads and insert them into the brackets.
    • Mount the calipers to the brackets and torque the bolts to 15 ft lbs.
  5. step : Put the wheel on (18:05)
    • Thread the lug nuts on.
    • Wiggle the wheel to make sure there isn't any play in the bearings.
    • Lower the vehicle
    • Torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Hammer

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 27mm socket
  • 15mm Socket
  • 19mm Socket

  • Sockets - SAE

  • 1/2 Inch Socket

  • Specialty Tools

  • Race Installation Tools

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1995-2001Ford Explorer Ford Explorer Rear Wheel Drive with Front Torsion Bar Suspension with Rear Wheel ABS Brakes Front Semi-Metallic Brake Kit
1998-2002Ford Ranger Ford Ranger Rear Wheel Drive with Front Torsion Bar Suspension with Rear Wheel ABS Brakes Front Semi-Metallic Brake Kit
2001-2002Mazda B2300 Truck Mazda B2300 Truck Rear Wheel Drive with Front Torsion Bar Suspension with Rear Wheel ABS Brakes Front Semi-Metallic Brake Kit
1998-2000Mazda B2500 Truck Mazda B2500 Truck Rear Wheel Drive with Front Torsion Bar Suspension with Rear Wheel ABS Brakes Front Semi-Metallic Brake Kit
1998-2000Mazda B3000 Truck Mazda B3000 Truck Rear Wheel Drive with Front Torsion Bar Suspension with Rear Wheel ABS Brakes Front Semi-Metallic Brake Kit
1998-2000Mazda B4000 Truck Mazda B4000 Truck Rear Wheel Drive with Front Torsion Bar Suspension with Rear Wheel ABS Brakes Front Semi-Metallic Brake Kit
1997-2001Mercury Mountaineer Mercury Mountaineer Rear Wheel Drive with Front Torsion Bar Suspension with Rear Wheel ABS Brakes Front Semi-Metallic Brake Kit

Part Interchange

Brand Label Part Number
Aimco 54180
Aimco 54029
Bendix PRT6051
Bendix PRT5076
DIY Solutions BFS00253
DuraGo BR54029
Raybestos EHT652H
Raybestos SGD652M
Raybestos SP652TRH
Raybestos Brakes EHT652H
Raybestos Brakes SP652TRH
Raybestos Brakes SGD652M
Raybestos Brakes 66597
Raybestos Brakes 680905
Wagner BD126563
Wagner BD125495

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Product Reviews
There are no reviews for this item.
Part 1ABFS00005
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA10489