Replaces

Ford Mazda Mercury Front Semi-Metallic Brake Kit

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Semi-Metallic
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove the Wheel (1:00)
    • While your car is still on the ground, use your 21mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 21mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (1:43)
    • Remove the four 13mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Use your 15mm socket and ratchet to remove your caliper brackets to access the rotors.
    • Pull off the brake rotor.
  3. step : Install new rotor and pads (4:10)
    • Clean new rotor with brake cleaner.
    • Check your caliper pins to make sure they are in good working order.
    • Put your caliper bracket back on, and tighten the 15mm bolts to 60-65 ft lbs.
    • Insert your new pads into the brackets.
    • Dab the sides where they slide into the brackets with anti-seize lubricant.
    • Loosen the cap on the brake fluid.
    • Use your C-clamp or caliper tool to compress your caliper.
    • Place your caliper onto the bracket.
    • Tighten your 13mm bolts to 25 ft lbs
    • Tighten the cap on your brake fluid.
  4. step : Put wheel back on (9:00)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 100 ft lbs.
    • Replace hubcap.
  5. step : Test and set brakes (9:05)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • Obviously this is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 21mm Socket

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1995-2000Ford Explorer Ford Explorer 4 Wheel Drive Front Semi-Metallic Brake Kit
2001Ford Explorer Ford Explorer 4 Door 4 Wheel Drive Front Semi-Metallic Brake Kit
1998-2002Ford Ranger Ford Ranger 4 Wheel Drive Front Semi-Metallic Brake Kit
2001-2002Mazda B2300 Truck Mazda B2300 Truck 4 Wheel Drive Front Semi-Metallic Brake Kit
1998-2001Mazda B2500 Truck Mazda B2500 Truck 4 Wheel Drive Front Semi-Metallic Brake Kit
1998-2002Mazda B3000 Truck Mazda B3000 Truck 4 Wheel Drive Front Semi-Metallic Brake Kit
1998-2002Mazda B4000 Truck Mazda B4000 Truck 4 Wheel Drive Front Semi-Metallic Brake Kit
1997-2001Mercury Mountaineer Mercury Mountaineer 4 Wheel Drive Front Semi-Metallic Brake Kit

Part Interchange

Brand Label Part Number
Aimco 54035
Bendix PRT5075
DIY Solutions BFS00252
DuraGo BR54035
Raybestos SGD652M
Raybestos SP652TRH
Raybestos EHT652H
Raybestos Brakes EHT652H
Raybestos Brakes SGD652M
Raybestos Brakes SP652TRH
Raybestos Brakes 66576
Wagner BD125494

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Product Reviews
4.60/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
1
0
0
Great Desl
They were an exceptional deal for price. That deal couldnt have been bettered. As for quality they seem to be ok but only time will tell. I should have the chance to write a review when they wear out to see how long they last haha. Putting them on at 160k so will see how it goes.
July 8, 2017
New front rotors & pads
Perfect fit, timely delivery, but after only 3 weeks on my Ford Ranger the brakes seem to growl at intersections and at stops. Braking is fine but noisy in side-by-side traffic causing other motorists to glance over as Im repositioning or creeping forward.
August 14, 2017
Awesome Set!
These brake rotors were brand new and nice and shiny! The brake pads were in tip top shape and went on great!
October 25, 2018
Great quality and even better price
Received the parts on time and were an exact fit. Great price for this and so far has been excellent quality with no issues. Would highly recommend to anyone!
October 25, 2018
I-was-well-pleased-with-the-parts-that-I-ordered,and-was-very-impressed-with-their-quality-and-the-speed-with-which-they-delivered. jerry-harris
October 30, 2018
Part 1ABFS00004
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA10488