MGSFK00005-Ford Mazda Mercury Front Outer 2 Piece Tie Rod Set

Replaces

Ford Mazda Mercury Front Outer 2 Piece Tie Rod Set MOOG MGSFK00005

MGSFK00005

Part Details

  • Set Quantity: 2 Piece
FREE SAME DAY SHIPPING
Save 35%
List: $98.95 Save: $35.00
Only 2 left in stock
Part MGSFK00005
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

MOOG
Brand #: MGSFK00005

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Set Quantity:   2 Piece

MOOG ES3461 [FRONT OUTER TIE ROD ENDS]

These Moog brand front outer tie rod ends are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) OUTER
  • Replaces one of many dealer part numbers including: 5L5Z-3A130-AA, F87Z-3A130-BA, 5L5Z3A130AA, F87Z3A130BA
  • Connects to inner tie rods
  • Grease-able
  • Direct replacements
  • Built to strict quality control standards

When installed correctly and an alignment performed, these outer tie rods could also reduce uneven tire wear.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove the wheel (1:10)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
    • Put the wheel under the vehicle for added security in the event of a jack failure.
  2. step : Remove the brakes (2:00)
    • Remove the 13 mm sockets anchoring the caliper.
    • Wire tie the caliper up out of the way.
    • Use a 15mm socket to remove the caliper bracket
    • Remove the rotor
    • Remove the dust shield with your 8 mm socket and ratchet
  3. step : Remove the outer tie rod (3:00)
    • Use your pliers to remove the cotter pin from the tie rod
    • Remove the nut with your 21 mm socket and ratchet
    • Pull apart the tie rod with a tie rod puller.
    • Use a paint marker to mark where the top nut on the tie rod is.
    • Use two adjustable wrenches to remove the tie rod.
  4. step : Install the new tie rod (6:15)
    • Apply a little loctite to the inner tie rod
    • Screw on the outer tie rod to the inner tie rod up to your paint marker mark.
    • Fill the dust boot with grease
    • Reassemble the tie rod end, replacing the nut and cotter pin.
    • Reassemble the brakes and wheel.
    • See our other videos for more detailed instructions.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Liquid Thread Locker
  • Marker / Writing Utensil
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Lug Wrench
  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 8mm Socket
  • 15mm Socket
  • 21mm Socket

  • Specialty Tools

  • Tie Rod Puller

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1998-2003Ford Explorer Ford Explorer Front Outer 2 Piece Tie Rod Set
1998-2011Ford Ranger Ford Ranger Front Outer 2 Piece Tie Rod Set
2001-2003Mazda B2300 Truck Mazda B2300 Truck Front Outer 2 Piece Tie Rod Set
1998-2001Mazda B2500 Truck Mazda B2500 Truck Front Outer 2 Piece Tie Rod Set
1998-2004Mazda B3000 Truck Mazda B3000 Truck Front Outer 2 Piece Tie Rod Set
1998-2004Mazda B4000 Truck Mazda B4000 Truck Front Outer 2 Piece Tie Rod Set
1998-2003Mercury Mountaineer Mercury Mountaineer Front Outer 2 Piece Tie Rod Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS08538
DIY Solutions SUS07359

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
MOOG
Brand #: MGSFK00005
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Ford Mazda Mercury Front Outer 2 Piece Tie Rod Set MOOG MGSFK00005-MGSFK00005 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.