1ASTE00809-Ford Mazda Mercury Driver or Passenger Side Outer Tie Rod


Ford Mazda Mercury Driver or Passenger Side Outer Tie Rod TRQ

10-12 Escape; Mariner Outer Tie Rod End LH=RH
$ 29.95
17% OFF
17% OFF
In Stock
Part 1ASTE00809

Orders must be placed by 2pm ET
Part 1ASTE00809
In Stock
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Frequently bought together


Vehicle Fit

Warranty & Shipping
How-To & Tools


  • Brand New Tie Rod End
  • Fits LH (Driver Side) or RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Install Tip: When replacing steering components, have a professional alignment performed afterwards.  This ensures proper tracking and even tire wear.

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.  Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses.  Final shipping costs are available at checkout.

How to Replace Outer Tie Rod 10-12 Ford Escape

Created on: 2019-05-06

Watch this video to learn how to replace the outer tie rod on your 10-12 Ford Escape. Tie rods and ball joints are

  1. step 1 : Removing the Wheel
    • Loosen the lug nuts with with a 19 mm socket while the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step 2 : Removing the Outer Tie Rod
    • Use rust penetrant on all rusty surfaces
    • Loosen the 21 mm jam nut on the tie rod
    • Remove the 18 mm tie rod end ball joint castle nut with a socket and breaker bar
    • Hammer up the tie rod ball joint to remove it
    • Unscrew the tie rod end counting how many turns it takes to come off
    • Write down the number of turns
    • Remove the jam nut
  3. step 3 : Installing the Outer Tie Rod
    • Replace the jam nut
    • Thread the outer tie rod onto the inner tie rod, turning it the same number of times it took to come off
    • Hand tighten the jam nut to the outer tie rod
    • Insert the outer tie rod ball joint into the knuckle
    • Install the 18 mm castle nut on the tie rod ball joint
    • Torque the castle nut to 59 ft-lb
    • Install a new cotter pin through the castle nut and tie rod ball joint
    • Fill the tie rod ball joint with grease using a 7 mm grease fitting and grease gun
    • Torque the 21 mm jam nut to 46 ft-lb
  4. step 4 : Replacing the Wheel
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle partially to the ground
    • Torque the lug nuts to 100 ft-lb
    • Lower the vehicle completely

Tools needed for replacement

  • General Tools

    Jack Stands

    Floor Jack

  • Ratchets & Related

    Socket Extensions

    1/2 Inch Breaker Bar

  • Sockets - Metric

    17mm Socket

    19mm Socket

  • Wrenches - Metric

    7mm Wrench

    19mm Wrench

Installation Video
Watch video

Fits these Makes

Year Make Model Description
2010-2012Ford Escape Ford Escape Driver or Passenger Side Outer Tie Rod
2010-2011Mazda Tribute Mazda Tribute Driver or Passenger Side Outer Tie Rod
2010-2011Mercury Mariner Mercury Mariner Driver or Passenger Side Outer Tie Rod

Part Interchange

Brand Label Part Number
DIY Solutions SUS08014
MOOG ES800846
MOOG Chassis Products ES800846
Mevotech MS40627

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

In Stock
Part 1ASTE00809
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Ford Mazda Mercury Driver or Passenger Side Outer Tie Rod TRQ-1ASTE00809 does not fit your:

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.