1ABPS03273-Ford Lincoln Mercury Rear Parking Brake Shoe Set

Replaces

Ford Lincoln Mercury Rear Parking Brake Shoe Set TRQ

1ABPS03273
FREE SAME DAY SHIPPING
Part 1ABPS03273
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BFA73819
Description

Vehicle Fit

Warranty & Shipping
How-To & Tools

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

How to Replace Parking Brake Shoe & Hardware Kit 02-10 Mercury Mountaineer

Created on: 2014-10-25

Watch this video to learn how to fix fading or squeaky emergency brakes. The experts at 1A Auto show you how to replace the emergency brake shoes on your 02-05 Ford Explorer or Mercury Mountaineer.

  1. step 1: Removing the Wheel
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step 2: Removing the Brake Pads
    • Remove the 10mm bolts from the brake caliper
    • Pull the caliper aside
    • Pull the rotor off
  3. step 3: Removing the Brake Shoes
    • Remove the brake shoe springs with the vise grip pliers
    • Remove the brackets from the retaining pins
    • Remove the brake adjuster
    • Remove the brake shoe
  4. step 4: Installing the New Brake Shoes
    • If you want to use your old adjustor spray the pin with rust penetrant
    • Test and make sure you can twist the adjust by hand
    • Push out the retaining pins
    • Put the upper retaining pin in place
    • Bring a wire through the second retaining pin hole
    • Strip the wire with wire strippers
    • Wrap the wire around the pin
    • Pull the pin up through the hole and disconnect the wire
    • Lift the front brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining bracket with vise grip pliers
    • Repeat the process with the rear brake shoe
    • Put the adjuster into place
    • Push the brake shoes together by hand
    • Put the adjuster clip into place
    • Hook the springs on with the vise grip pliers
    • Wipe the brake shoes with mineral spirits
  5. step 5: Reinstalling the Caliper
    • Push the rotor into place
    • Turn the adjustor if you have too much or too little resistance
    • Clean off the brake pad slides on the caliper bracket with a wire brush
    • Put the caliper on
    • Tighten the 10mm bolts
  6. step 6: Reattaching the Wheel
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  7. step 7: Testing the Brakes
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement

  • General Tools

    Jack Stands

    Floor Jack

  • Materials, Fluids, and Supplies

    Wire or String

  • Pliers, Cutters & misc Wrenches

    Wire Cutters

    Needle nose pliers

    Vise Grip Pliers

  • Ratchets & Related

    Torque Wrench

    Ratchet

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Sockets - Metric

    19mm Socket

    10mm Socket

Installation Video
Watch video

Fits these Makes

Year Make Model Description
2002-2010Ford Explorer Ford Explorer Rear Parking Brake Shoe Set
2007-2010Ford Explorer Sport Trac Ford Explorer Sport Trac Rear Parking Brake Shoe Set
2003-2005Lincoln Aviator Lincoln Aviator Rear Parking Brake Shoe Set
2002-2010Mercury Mountaineer Mercury Mountaineer Rear Parking Brake Shoe Set

Part Interchange

Brand Label Part Number
FMSI S791
Ford 1L2Z2648AA
Ford 6L2Z2648A
Lincoln 1L2Z2648AA
Mercury 1L2Z2648AA
Mercury 6L2Z2648A

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BFA73819
Product Reviews
5.00/ 5.0 1
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Correct part for 06 Explorer
November 1, 2020
Fit my 06 explorer perfectly, looked identical to original save the wear. No fitment issues. Engaged rotor well after adjustment. Good part.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Ford Lincoln Mercury Rear Parking Brake Shoe Set TRQ-1ABPS03273 does not fit your:



Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.