1ABRX00029-Ford Lincoln Mercury Rear Parking Brake Shoe Hardware Kit

Replaces

Ford Lincoln Mercury Rear Parking Brake Shoe Hardware Kit

1ABRX00029

This part replaces:

  • Dorman HW17390
FREE SAME DAY SHIPPING
Save 32%
List: $43.95 Save: $14.00
Only 1 left in stock
Part 1ABRX00029
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BFS01528

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Specifications:

  • Will service both LH (Driver Side) & RH (Passenger Side) Rear
  • Kit includes:
    • 4 Springs
    • 4 Retainers
    • 4 Pins
    • 4 Adjusters
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:44)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:10)
    • Remove the 10mm bolts from the brake caliper
    • Pull the caliper aside
    • Pull the rotor off
  3. step : Removing the Brake Shoes (1:50)
    • Remove the brake shoe springs with the vise grip pliers
    • Remove the brackets from the retaining pins
    • Remove the brake adjuster
    • Remove the brake shoe
  4. step : Installing the New Brake Shoes (2:57)
    • If you want to use your old adjustor spray the pin with rust penetrant
    • Test and make sure you can twist the adjust by hand
    • Push out the retaining pins
    • Put the upper retaining pin in place
    • Bring a wire through the second retaining pin hole
    • Strip the wire with wire strippers
    • Wrap the wire around the pin
    • Pull the pin up through the hole and disconnect the wire
    • Lift the front brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining bracket with vise grip pliers
    • Repeat the process with the rear brake shoe
    • Put the adjuster into place
    • Push the brake shoes together by hand
    • Put the adjuster clip into place
    • Hook the springs on with the vise grip pliers
    • Wipe the brake shoes with mineral spirits
  5. step : Reinstalling the Caliper (6:32)
    • Push the rotor into place
    • Turn the adjustor if you have too much or too little resistance
    • Clean off the brake pad slides on the caliper bracket with a wire brush
    • Put the caliper on
    • Tighten the 10mm bolts
  6. step : Reattaching the Wheel (8:33)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  7. step : Testing the Brakes (9:08)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Wire or String

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters
  • Needle nose pliers
  • Vise Grip Pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002-2010Ford Explorer Ford Explorer Rear Parking Brake Shoe Hardware Kit
2007-2010Ford Explorer Sport Trac Ford Explorer Sport Trac Rear Parking Brake Shoe Hardware Kit
2003-2005Lincoln Aviator Lincoln Aviator Rear Parking Brake Shoe Hardware Kit
2002-2010Mercury Mountaineer Mercury Mountaineer Rear Parking Brake Shoe Hardware Kit

Part Interchange

Brand Label Part Number
DIY Solutions BFS01528

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BFS01528
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Excellent I already install it thank u u have a great day
September 5, 2017
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Ford Lincoln Mercury Rear Parking Brake Shoe Hardware Kit-1ABRX00029 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.