1AEIM00010-Ford Lincoln Mercury Intake Manifold

Replaces

Ford Lincoln Mercury Intake Manifold TRQ

1AEIM00010
FREE SAME DAY SHIPPING
96-00 Ford Crown Victoria 4.6L Intake Manifold
Save 38%
List: $218.95 Save: $84.00
1
Add to Cart
Part 1AEIM00010
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: IMA07937

Frequently bought together

96-00 Ford Crown Victoria 4.6L Intake Manifold
Ford Lincoln Mercury Intake Manifold TRQ
$134.95
Park Right: Battery Powered Garage w/Dual Laser Park Assist (Requires Two AA Batteries)
Dual Garage Parking Assist Laser Park Right 37110
$33.95
Description

Vehicle Fit

Warranty & Shipping
How-To & Tools

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a single purchase of a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.  Shipping is not available to Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses.  Final shipping costs are available at checkout.

Manifold Torque Sequence

How to Replace Intake Manifold 98-07 Ford Crown Victoria

Created on: 2019-01-22

In the video, 1A Auto shows how to remove, replace and install an old, rusted, corroded or leaking intake manifold. The video is applicable to the 04 Ford Crown Victoria

  1. step 1 : Relieving the Fuel Pressure
    • Remove the truck lining
    • Pop up the red inertia switch button
    • Start the vehicle and let it run until it stalls
  2. step 2 : Disconnecting the Battery
    • Loosen the 8mm nut on the negative side of the terminal
    • Isolate the terminal away from the battery
  3. step 3 : Removing the Air Intake
    • Use an open drive on a 1/4 inch ratchet
    • Loosen the screw on the engine cover
    • Remove the engine cover
    • Disconnect the MAF sensor
    • Release the airbox clips
    • Lift up the cover
    • Disconnect the two breather hoses
    • Loosen and intake boot clamp
    • Remove the intake
  4. step 4 : Removing the Serpentine Belt
    • Familiarize yourself with the route of the serpentine belt
    • Insert the 3/8 inch drive ratchet into the tensioner
    • Turn the tensioner clockwise to loosen the belt
    • Pull the belt off the alternator
    • Release the tensioner
    • Pull the belt off by hand
  5. step 5 : Removing the Alternator
    • Pry up the alternator connector
    • Remove the 10mm power lead bolt
    • Remove the lead
    • Hand-tighten the 10mm back to the lead thread
    • Remove the four 10mm bolts from the alternator and its plate
    • Remove the metal plate
    • Loosen the two 10mm bolts from the bottom of the alternator
    • Remove the alternator
  6. step 6 : Draining the Coolant
    • Unscrew the radiator cap
    • Stick a hose into the coolant drain
    • Have a drain pan ready
    • Open the drain plug with a 19mm socket and ratchet
    • Hand-tighten the drain plug
  7. step 7 : Removing the Temperature Sensor
    • Collapse the upper radiator hose clamp
    • Slide it down the hose
    • Pry off the hose from the housing with channel lock pliers
    • Remove the two 10mm bolts from the housing
    • Remove the thermostat housing
    • Remove the thermostat
  8. step 8 : Removing the Throttle Body Cables
    • Rotate the arm on the throttle body
    • Pry off the wire from the slotted tab
    • Keep the arm down
    • Slide the end of the wire out of the notch
    • Release the tension
    • Unhook the spring
    • Remove the two 10mm bolts on top of the throttle cable retainer bracket
    • Pry the throttle cable out of the retainers in the heat shield
    • Remove the coolant feed line from the throttle body de-icer
    • Remove the vacuum line from the throttle body
  9. step 9 : Disconnecting the EGR Tube
    • Remove the two 10mm bolts on the EGR tube heatshield
    • Place a paper towel beneath the EGR tube
    • Spray rust penetrant on the EGR tube
    • Loosen the nut on the valve
  10. step 10 : Removing the Throttle Assembly
    • Disconnect the connections on the EGR valve
    • Disconnect the vacuum ports on the front of the throttle body assembly
    • Disconnect the large breather hose next to the port
    • Disconnect the throttle position sensor wiring harness
    • Disconnect the idle air control connectors
    • Remove the five 8mm bolts securing the throttle assembly to the intake manifold
  11. step 11 : Disconnecting the Fuel Rail
    • Pop the safety tab off of the fuel rail inlet
    • Wear proper safety equipment
    • Slide a disconnect line tool into the fuel line
    • Pull the line out
  12. step 12 : Removing the Fuel Rail
    • Disconnect the coolant temp sensor
    • Disconnect the three pin connector at the end of the fuel rail
    • Disconnect the vacuum connections
    • Disconnect the fuel injector wiring harnesses
    • Disconnect the ignition coil wiring harnesses
    • Disconnect the ground clip
    • Remove the two 8mm bolt on the fuel rail
    • Remove the two 15mm bolts on the headshield (one atop the bracket and one under the harness)
    • Pop the alternator harness off of the bolt
    • Disconnect the fuel injector wiring harnesses
    • Disconnect the ignition coil wiring harnesses
    • Remove the two 8mm bolt on the fuel rail on the other side of the engine
    • Pop the injectors up and out of the intake manifold
    • Remove the fuel rail and injectors
  13. step 13 : Removing the Intake Manifold
    • Remove the 16mm bolt from the ignition coil
    • Remove all the ignition coils
    • Compress the coolant hose clamp at the back of the intake
    • Pull the hose out
    • Remove the remaining eight 10mm bolts from the intake manifold (5 on the passenger side; 3 on the driver side)
    • Carefully remove the intake manifold from the vehicle
  14. step 14 : Cleaning the Intake Manifold Gasket Surface
    • Insert paper towels into the inserts
    • Remove the old gaskets
    • Use brake cleaner and a paper towel off of the gasket surfaces
    • Remove the paper towels once the surface is clean
    • Wipe up any coolant or dirt or debris from the valley in the engine
  15. step 15 : Installing the Intake Manifold
    • Lay the new manifold into the sound deadening material
    • Lower the intake manifold into place
    • Tighten the eight 10mm bolts by hand to the intake manifold
    • Tighten the 10mm bolts to 18 foot-pounds or 25 newton-metres in the correct torque sequence
    • Remove the cap
    • Install the cooling line at the rear and compress the clamp
  16. step 16 : Reinstalling the Fuel Rail
    • Reinstall the ignition coils
    • Reinstall the fuel rail
    • Reinstall the 8mm fuel rail hold down screws
    • Connect the fuel injector wiring harnesses
    • Connect the ignition coil wiring harnesses
    • Connect the alternator retainer to the wire
    • Connect the vacuum modulator
    • Connect the coolant temp sensor connector
    • Insert the ground connection to the fuel rail stud
    • Connect the vacuum fitting
    • Connect the fuel supply line
    • Reingage the safety
  17. step 17 : Switching Over Sensors to the New Intake Manifold
    • Remove the coolant temp sensor from the old intake manifold
    • Clean the old dirt from the coolant temp sensor threads
    • Apply thread sealant onto the threads of the sensor
    • Install the sensor to the new manifold
    • Connect the wiring harness to the coolant temp sensor
    • Install the M8 Allen plug to the new manifold
  18. step 18 : Reinstalling the Heatshield
    • Line up the bolts to the heatshield
    • Reinstall the heatshield bracket on the driver side
    • Reconnect the wire harness to its bracket
    • Tighten the bolts to the heatshield
    • Torque the upper bolt to the 18 foot-pounds
  19. step 19 : Reinstalling the Throttle Assembly
    • Clean off the surface of the bottom of the throttle assembly
    • Insert the throttle assembly onto the top of the manifold
    • Reinstall the five 8mm screws to the assembly
    • Reinstall the EGR tube into the EGR valve with groove jaw pliers
    • Reinstall the EGR tube heatshield
    • Tighten the two 7mm screws to the heatshield
    • Reconnect the EGR valve connector
    • Press on the vacuum fittings
    • Connect the vacuum line
    • Connect the breather hose to the valve cover
    • Route the throttle/cruise control cables around and into their retainers
    • Reinstall the 10mm bolts to the retainer bracket
    • Open the throttle body by hand
    • Insert the pin and rotate the throttle cable into its channel
    • Snap the cruise control cable into place
    • Reinstall the return spring
    • Reconnect the breather hose
    • Reconnect the coolant de-icer hose
    • Reconnect the throttle position sensor harness
    • Reconnect the idle harness
  20. step 20 : Reinstalling the Thermostat
    • Lay the thermostat into place
    • Insert the housing into place
    • Tighten the two 8mm bolts to the housing
    • Torque the bolts to 18 foot-pounds
    • Reinstall the upper radiator hose to the thermostat housing
    • Set the clamp into place
  21. step 21 : Reinstalling the Alternator
    • Relocate the stud from the old manifold to the new one
    • Reinstall the alternator
    • Reinstall the top bracket and hand-tighten the screws
    • Fully tighten the top bracket bolts
    • Tighten the bottom bolts to the alternator
    • Reconnect the electrical connector
    • Reconnect the power leader and 10mm nut
  22. step 22 : Reinstalling the Serpentine Belt
    • Loop the belt around the crank pulley
    • Bring it around the water pump
    • Bring it over the belt tensioner
    • Bring it under the A/C Pulley
    • Bring it over the idler pulley
    • Bring it around the power steering pulley
    • Pull the tensioner clockwise with the 3/8 inch ratchet
    • Pull the belt over the alternator
    • Release the tensioner
  23. step 23 : Reinstalling the Air Intake
    • Install the intake boot onto the throttle body
    • Tighten the hose clamp with a flat blade screwdriver
    • Connect the breather hoses
    • Press the airbox lid into place
    • Clamp the air box
    • Connect the MAF sensor
    • Reinstall the engine cover
    • Tighten the screw on the cover with a 1/4" ratchet and extension
  24. step 24 : Reconnect the Battery
    • Reconnect the negative terminal
    • Tighten the terminal with a 5/16 or 8mm wrench
  25. step 25 : Priming the Fuel Lines
    • Press down on the red intertia switch button
    • Insert a funnel into the coolant reservoir
    • Fill the cooling system
    • With the cap off, turn the key to the run position
    • Allow the fuel pump to turn on and off
    • Repeat the cycle two more times
    • Start the vehicle
    • Set the vehicle to vent/heat on the lowest setting
    • Keep an eye on the coolant level
    • Add coolant as needed
    • Reinstall the cap once completed

Tools needed for replacement

  • General Tools

    Funnel

    Jack Stands

    Drain Pan

    Wire Brush

    Floor Jack

  • Materials, Fluids, and Supplies

    Rust Penetrant

    Dust Mask

    Safety Glasses

    Gloves

    Paper Towels

    Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

    Channel-Lock Pliers

  • Ratchets & Related

    Socket Extensions

    Torque Wrench

    3/8 Inch Drive Ratchet

    1/4 Inch Ratchet

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Sockets - Metric

    Complete Metric Socket Set

  • Specialty Tools

    Fuel Line Disconnect Tool

  • Wrenches - Metric

    Complete Metric Wrench Set

Installation Video
Watch video

Fits these Makes

Year Make Model Description
1996-2000Ford Crown Victoria Ford Crown Victoria V8 4.6L (8th Vin Digit W) Intake Manifold
1996-2000Ford Crown Victoria Ford Crown Victoria V8 4.6L (8th Vin Digit 9) Intake Manifold
1996Ford Crown Victoria Ford Crown Victoria V8 4.6L (8th Vin Digit 6) Intake Manifold
1996-1998Ford Mustang Ford Mustang V8 4.6L SOHC (8th Vin Digit X) Intake Manifold
1996-1997Ford Thunderbird Ford Thunderbird V8 4.6L (8th Vin Digit W) Intake Manifold
1996-2000Lincoln Town Car Lincoln Town Car V8 4.6L (8th Vin Digit W) Intake Manifold
1996-1997Mercury Cougar Mercury Cougar V8 4.6L (8th Vin Digit W) Intake Manifold
1996Mercury Grand Marquis Mercury Grand Marquis V8 4.6L (8th Vin Digit 6) Intake Manifold
1996-2000Mercury Grand Marquis Mercury Grand Marquis V8 4.6L (8th Vin Digit W) Intake Manifold

Part Interchange

Brand Label Part Number
DIY Solutions ENG00286

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: IMA07937
Product Reviews
4.70/ 5.0 43
43 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
35
5
2
0
1
March 2, 2017
The parts came properly packaged and everything was included as stated in the description. The part has been placed on my vehicle and we haven't had any issues. I am satisfied.
Replacing Intake Manifold on a 2000 Grand Marquis
July 9, 2017
Had to replace the intake manifold on my year 200 Grand Marquis. Although I've never "tackled" this kind of repair, was able to the job in 3 1/2 to 4 hours. This time did not include cleaning all of the gunk from the cylinder heads. Found the instruction easy to follow and am extremely satisfied. Price was great and delivery right on schedule. Will buy other products from 1AAUTO if need arises.
September 15, 2017
Thanks for the chance to give you my input on this product it was a perfect fit for my Lincoln Town car,it came with everything I needed and installation was easier than I thought it would be. The price was half what the local parts store charged and the car runs better than it ever did! I'll be a customer from now on for everything I need in the future. Thanks again 1A Auto.W.Milot
i got it on saterday
November 28, 2017
thank you for reshipping it to me i got the old one off but have not installed the new one yet bad weather here in denver. roger heckler classic auto and truck denver co
1AEIM00010-Intake Manifold
February 3, 2018
Excellent replacement part. no complaints. everything as advertized. Best price, quality, and installation instructions via Youtube!
Exact Fit
February 26, 2018
I purchased this part on Amazon by the Doorman company, but it was not an exact fit.However, this part fit perfect and was a breeze to install.
Intake
May 8, 2018
Replace the old 4.6 intake that was leaking st the thermostat and the aluminum elbow works great.
August 24, 2018
Kit worked out great much better than the factory original design. Everything needed to do the job correctly was included in the kit. Very happy cars running like it used to would recommend this kit to anyone that has the 4. 6 intake manifold leak.
Intake
August 29, 2018
The part arrived on time and was exactly what I needed. The video also assisted in the replacement of the part.
Fast ship! Satisfied customer
October 25, 2018
Although I am not a mechanic, I would recommend the manifold as it was the best priced and I haven't had any issues since purchasing.
Installed smoothly, works great!
November 13, 2018
No issues when installing this into the vehicle, more time was actually spent on cleanup and getting little things to replace old OEM Ford parts that had failed outside of this kit! On top of that, the part shipped fast, at a fair cost considering the weight! Everything seems very durable, like it will last for a long time. If you're stuck on whether to order from here through 1A, or another competitor, stop waiting, you've found your part!
Intake manifold
December 7, 2018
The part worked but there were a few issues. The new alternator bracket needed to be bent to fit properly, and also needed two of its holes drilled out larger. The throttle body holes on the manifold were not deep enough to use the original bolts, so I used the old plastic spacer. A1 advertised a metal coolant crossover, but the base of each side of the crossover is still plastic where it meets the heads. The worst part is that the included thermostat failed in the closed position after driving about 150 miles, so you probably want to get a better one that will fail open. I just put the original thermostat back in. Also the point where the radiator hose gooseneck meets the new manifold is not a great fit, so be prepared to use some form a gasket because the included oring will not do the job. It was nice having the orings that meet the cylinder heads integrated into the new manifold. The reason I ordered this one was that it was the cheapest available.
Intake Manifold better than prior designs
January 4, 2019
The manifold bolt hole alignment and intake ports matched exactly. The seals were excellent quality. All parts needed to do the job were included. No leaks, no seem cracks, I love how it had excellent vacuum and no issues. I recommend A1 Auto as a primary source for new parts.
Intake manifold
January 9, 2019
Its my first time ordering from 1A auto and ill say it was easy and my part arrived in a few days, it was an easy install and it actually looks great.id order from 1A auto again because a car that i bought for project went to daily driver and now is bk to being a project car hoping to have it all buttoned up for car show season....like to say thank u wish i could add a pic...
Intake Manifold
January 11, 2019
Received promptly, good price. Have not installed it yet so I'll get back to you on how that goes.
Intake Manifold
February 3, 2019
Bought this intake after going through three from Dorman. This was great quality, easy to install and had everything in it. Best of all I didnt have to use any RTV to fix a flaw that the company knows is there. Great experience!!!!
Perfect Part Replacement
February 20, 2019
Arrived 2 days after purchase and took only a few hours to install. It was the perfect replacement for the factory part that failed due to age and typical wear. The instructions were simple and with the linked video showing the work done, I was able to successfully get my Town Car back on the road working better than before the repair.
intake manifold
February 25, 2019
I bought it to replace the factory stock intake manifold, this seems to be better quality than factory. The part of the manifold that is a common problem with cracking due to being plastic on stock is made of metal on this replacement. The installation video was a big help in being able to this ourselves
?? Excellent for 1999 Crown Victoria LX
March 8, 2019
I found 1AAuto.com by searching on YouTube for how to replace an intake manifold on a Crown Vic. Watched 1A's video and was impressed. Researched elsewhere online, looked at different part suppliers, and settled on A1. • Low enough retail price for a new part. I was not interested in tracking down and salvaging a used part, nor paying a premium for new OEM. A1's part actually turned out to be both the best-reviewed and lowest-priced of parts that I was interested in. • Clean, well-organized webpage for the part. Readily offered all the documentation that I sought: detailed description, high-resolution product photos, FAQ, vehicle fit, reviews, part # of similar part from other manufacturers. • Installation video. Gained much of my confidence in A1 from the video. Clear, straight-to-the-point demonstration. Made this in-driveway DIY repair possible for me. Well done, A1. I used part #1AEIM00010 as recommended for a 1999 Crown Vic and it has been working great. Note
Great Video & great product
March 9, 2019
I am a novice mechanic and was afraid to try to replace an intake manifold on a 1999 Grand Marquis. The Video was so good that I ordered the part and was able to install it with very little trouble. I have ordered several parts for 1AAuto and have never been disappointed, and have recommended them to others. Thanks, Carl
March 26, 2019
Fit perfect. Great part. Better than oem part. Price was good.
Intake manifold
June 10, 2019
Fits ,Easy to instal Runs like new.
Part was defective, refunded price no questions asked
June 23, 2019
I really have no complaints outside of the fact the part was defective. Shipping was fast, all the brackets and extra bolts were there exactly as in the pictures. The car ran poorly and after a smoke test it was determined that it had a major leak in one of the seams. The car is a DD so it had to be fixed immediately. Purchased a Dorman from a local source and sent it on its way. I explained to customer service the issue and was refunded the price no questions asked, no need to return the intake. Typically I'd run into problems with other suppliers because the part had been installed and they usually try to blame it on installation error. Those past experiences had me worried. It didn't happen here and for that reason I will buy parts from here in the future. Defects sometimes happen and I'm glad they believed me. I'd give 5 stars if it was for the customer service alone.
4.6 intake manifold
June 30, 2019
it work perfect;VERY SATISFIED, defenetly willcontinue doing business; great company...keep up the great work!!
97 Ford Thunderbird
July 14, 2019
The new intake manifold fit perfect on my 4.6L V8. The only thing that didn’t was the alternator bracket. It came with one that was similar but the holes didn’t line up. Other than that, it works perfect!
Worker perfectly.
July 25, 2019
Fit my 1997 grand marquis with no issues. No need for gaskets as it has built in seals. Highly recommend
Awesome product
August 4, 2019
Got exactly what I ordered. Perfect fit with new seals and thermostat. I especially like that where my old manifold cracked at on this new part it’s not plastic Best experience so far ordering a part online
A perfect fit
September 4, 2019
to anyone who buy this part you will love it fits perfectly
perfect fit
October 19, 2019
I bought my used in 2001. Some had broken the plastic thermostat housing on the antifreeze crossover. It started leaking last winter. I made a repair to stop the leak. Several months later it started leaking again. This time it needed to be done right. I thought this would be a difficult repair. Thanks to the design of this manifold it was a piece of cake. Cleaned up the heads well and dropped it in. No leaks vaccuum or antifreeze. You will notice design change in the in coming air routed. I don't know if it improves airflow but it gives the engine a deeper sound. Not louder but deeper.
Great fit
October 28, 2019
So far this replacement manifold is doing good. Easy to put on and no need to worry about any gaskets. Have to say the 1A video showing how to replace was honestly the most clear and thorough auto video I've seen so far. Was replaced in a couple of hours.
Fit pretty well
November 5, 2019
Overall it fit pretty well and the only issue was that some of the threaded mounting holes on top of the manifold, where other parts bolted on, didn't seem to be tapped all the way or not very well and I felt like bolts weren't going to go all the way in or bind up and strip. They all ended up tightening up but I was a bit worried as I was tightening.
My first time
December 2, 2019
I have owed my 2000 crown victoria for the last 3 years, I lost my father in 2018 around this time. This car was the last thing we worked on together, the car recently had a coolant leak. I tried everything to quick fix, as this is my only means of transportation. I ordered the upper intake manifold and a new radiator. With the help of A1 DIY, I successfully replaced both the manifold and radiator. Check engine light turned off and I’m back on the road before it snows.
Not the best
December 7, 2019
It fit perfect but the inside diameter of the manifold is smaller then stock your mileage well drop alot
Greatest tool I've obtained sense zip ties!
April 26, 2020
I love, love, looove 1A! I only buy vehicles that are old enough I can work on and new enough with modern comforts. When I'm looking at a vehicle to possibly purchase, I pull up 1A Auto to determine if the purchase will be worth it. I sometimes may later regret the purchase because of hidden issues, but 1A makes it worth it in the end. Thanks 1A for making life so much easier!
Perfect replacement part
April 27, 2020
I did a lot of research before ordering this one, the reviews were all good but the low price left me hesitant. Turns out it is perfect, had no issues with install (apart from forgetting the thermostat housing spacers at first.)
Intake manifold for 2000 Crown Vic P71
June 24, 2020
I waited to do a review to be sure it was a good part,and 9 months later it's doing great so far and im very happy with my purchase .. thank you 1A Auto for another great part and delivery is always fast.
Good quality for the price.
July 26, 2020
Far better experience with 1aauto, there's nothing to complain about, will see how it holds up to test of time, fit and finish just like OEM, long runners, ( you retain torque at low rpm ) with redesigned intakes less power, these engine's don't rev high, 5k rpm shift point, just stay with OEM design.
1997 Mustang GT non-pi
August 12, 2020
Fit was perfect it arrived on time and my car has never run better. I had the dorman intake prior to this one it didnt fit, made my car run strange, and failed within a year. Probably works for the P.I. intake but not a non-pi 1997 mustang GT. Thanks 1a auto!
Intake manifold Lincoln town car
September 22, 2020
Excellent product and very fast shipping!!!
Intake Manifold Review
November 18, 2020
This was my 1st time buying from them..& I must say I was Very,Very Please with their Service from ordering my Part to Receiving it. They kelp me updated on they travel & deliver dates of my Part.and on top of the WONDERFUL SERVICE THAT THEY HAD Provided..They Went out of their way TO MAKE VIDEOS STEP BY STEP TO SHOW YOU HOW TO SAVE MONEY AND INSTALL IT YOURSELF..I am a female and have Never did no work like that ever..But after watching the video that they had provide it for their customers..I REMOVED AND REPLACED MY OWN INTAKE AND Saved A lot of money.So I most definitely will be ordering from them for all my car care needs.Thanks A-1Auto for Yall service.
1999 Lincoln Town Car 4.6L- Perfect Fit
December 2, 2020
Not being a mechanic and using the 1A Auto video I was able to uninstall the old leaking intake manifold and install the new one purchased from 1A Auto.I did have to remove the windshield wipers and plastic wiper motor tub with the wiper motor in order to access the rear bolts to remove the fuel rail heat shield on the driver side of the engine. I also had to use the new alternator mount shown in the left bottom corner of the picture just above the thermostat.image. Wish the instruction described where the various silver colored spacers go. I ended up only using the largest spacer to raise the bolt that is used to secure the left side of the air intake assembly by the left side of the alternator bracket.I did not use the 2 smaller silver colored spacers. I think they might be intended for the thermostat top that gets bolted down. to the new thermostat housing..I don't like the fact that the 10 provided screws secure parts directly into plastic holes on the new intake manifold.There
Great product!
January 10, 2021
Thank to 1aauto this repair was awesome and easy to follow step by step so me and my sons knocked out both valve covers and intake manifold in the same day no problem I will definitely be ordering from them again if I need anything for my crown Vic
Great site
January 18, 2021
I chose this site because I saw it has good ratings and I thought it would be great and it was actually everything was right and it fit jus fine I highly recommend this site for shipping parts you will not be disappointed ,because I certainly wasn’t thanks you for keeping your customers happy
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
With this part do you need gaskets between the block and the manifold?
August 3, 2017
10
Yes you do need gaskets.
August 4, 2017
10
All of the gaskets are included, so you don't have to buy them separately. They are needed when you put the part in though (in case that was your question).
August 4, 2017
10
If you get it from A1 auto it comes with some gaskets in place as well as thermo stat an all.
August 5, 2017
10
No, It comes with everything, gaskets are molded in, New thermostat, and even an alternator bracket, The only thing that you have to buy is Antifreeze.
September 15, 2017
10
No, it has gaskets molded in to the manifold already.
July 14, 2019
Your ad says it replaces a Dorman 615-178. Who manufactures this manifold? Thank you.
March 6, 2018
10
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
March 6, 2018
10
I can't remember the manufacturer but it was an exact replacement for the 4.6L engine and installation was straightforward.
March 6, 2018
Can i buy the universal alternator bracket seperate?
August 10, 2018
10
The alternator bracket only comes with this kit and is not sold separately. If you have any other questions feel free to contact us and have a great day!
August 10, 2018
I have a question. When I installed the intake I didn’t see instructions on how the new brackets for the alternator were to mount. I have finished the install and my alternator does not line up?
April 23, 2020
10
Thank you for contacting us. I have emailed you directly to assist you with the installation of the intake manifold purchased from us. Please respond to our email if you need any further assistance. Thank you.
April 24, 2020
Included in the bag of hardware was a square black block (spacer)? Please identify
September 27, 2020
10
I just checked the bag of extra parts I had from that project. There is a small black plastic piece with four holes in it. It was not needed to install the manifold on a grand marquis. There were a few extra parts in the kit I got to install it. Also don't be surprised if you have to bend the new bracket for the alternator. Or possibly drill the holes out larger. Good luck!
September 27, 2020
10
Please review the video on our listing - at 21:14, each item is explained, thank you!
September 30, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Enter Vehicle Year Make Model

Not all parts are the perfect fit. Enter your Vehicle and we'll confirm fit, or help get you to one that will.

Ford Lincoln Mercury Intake Manifold TRQ-1AEIM00010 does not fit your:

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

If your vehicle isn't listed, search Intake Manifold

This part will only fit a vehicle with these options.

If your option isn't listed search Intake Manifold