Replaces

Ford Lincoln Mercury Heater Blower Motor with Fan Cage DIY Solutions

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

This Ford Lincoln Mercury blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following

Specifications:

  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 1W7Z-19805-BA, EOTZ-19834-A, 1W7Z19805BA, EOTZ19834A
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

Note: Due to the wide range of vehicles and years that this blower motor fits, in some instances, the original fan cage may need to be swapped and used in place of the cage that comes with this assembly.

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Blower Motor (0:37)
    • Remove the top two 8mm bolts from the blower motor
    • Disconnect the blower motor wiring lead
    • Pull the wiring aside
    • Remove the lower two 8mm bolts from the blower motor
    • Disconnect the tube that runs from the motor to the firewall
    • Pull the blower motor up and out
  2. step : Installing the New Blower Motor (2:11)
    • Put the gasket on to the blower motor
    • Line up the hole on the blower motor bracket with the line-up stud
    • Push the blower motor down into place
    • Make sure the gasket is lined up correctly
    • Start one of the top bolts by hand
    • Start the two lower bolts by hand
    • Tighten the lower two bolts
    • Remove the top bolt
    • Put the wiring harnesses into place
    • Insert the two top bolts
    • Reconnect the blower motor wiring lead
    • Reinstall the tube that runs from the motor to the firewall

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 8mm Socket

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do you need a gasket for mounting blower motor to vehicle and how do I get one ?
Nicholas A August 13, 2019
You should not need an additional discount. At this time we are not selling any part like that on our site. Please let us know if you have any further questions.
Emma F August 14, 2019

Fits the following Makes:

Year Make Model Description
1980-1986Ford Bronco Ford Bronco with Factory Installed Air Condtioning Heater Blower Motor with Fan Cage
1979-2011Ford Crown Victoria Ford Crown Victoria Heater Blower Motor with Fan Cage
1980-1986Ford F100 Truck Ford F100 Truck with Factory Installed Air Condtioning Heater Blower Motor with Fan Cage
1980-1986Ford F150 Truck Ford F150 Truck with Factory Installed Air Condtioning Heater Blower Motor with Fan Cage
1980-1986Ford F250 Truck Ford F250 Truck with Factory Installed Air Condtioning Heater Blower Motor with Fan Cage
1980-1986Ford F350 Truck Ford F350 Truck with Factory Installed Air Condtioning Heater Blower Motor with Fan Cage
1979-1982Ford LTD Ford LTD Heater Blower Motor with Fan Cage
1980-1983Lincoln Mark VI Lincoln Mark VI Heater Blower Motor with Fan Cage
1980-1997Lincoln Town Car Lincoln Town Car Heater Blower Motor with Fan Cage
1979-2011Mercury Grand Marquis Mercury Grand Marquis Heater Blower Motor with Fan Cage
2003-2004Mercury Marauder Mercury Marauder Heater Blower Motor with Fan Cage

Part Interchange

Brand Label Part Number
DIY Solutions HVA01217

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1AHCX00056
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: HVA01217