Ford Lincoln Mercury Front Wheel Bearing & Hub Assembly TRQ

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing


  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Includes Tone Ring Sensor for ABS applications
  • Replaces dealer part numbers: F8AC2B663AB, F8AC-2B663AB, F8AC2C300AC, F8AC-2C300AC, F8AZ1104AA, F8AZ-1104AA, F8AZ1104BA, F8AZ-1104BA
  • Fits 5 Lug Wheel
  • Studs already installed
  • Built to strict quality control standards
  • Will fit vehicles with or without ABS

Note: For 1997 models you can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch piller that the door closes on.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

BHA53948 Axle / Spindle Nut Torque Specification

  1. step : Remove the wheel (1:04)
    • Pry off the center cap
    • Use the hub cap key to remove the hub cap.
    • Loosen the lug nuts.
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
    • For extra security, put the wheel under your car should your jack stands fail.
  2. step : disassemble the brakes (1:45)
    • Remove the 13 mm caliper bolts.
    • Use a screwdriver to pry between the caliper and caliper bracket to pry the caliper up and off.
    • Secure the caliper with wire ties up out of the way.
    • Using an 18 mm socket and a breaker bar or pipe for leverage, remove the caliper bracket bolts.
    • Remove the brake disc.
  3. step : Un-install the hub (3:56)
    • Remove the dust cover from the hub nut.
    • Using a breaker bar, maybe even a pipe for leverage in addition, remove the 35 mm hub nut.
    • Remove the hub.
  4. step : Install the new hub (4:48)
    • Clean up the area to insure a smooth fit.
    • Put the hub on, and replace the hub nut and torque it to 220 ft lbs.
  5. step : Reassemble the brakes (5:55)
    • Put the brake rotor/disc back on the hub.
    • Examine the brake rotor/disc for gouges or signs of excessive wear.
    • Replace the rotor if needed, remember to clean the rotor with warm soapy water or brake cleaner before installation, and prevent contact with oil and grease.
    • Check the condition of the brake pistons; make sure they slide in and out smoothly and freely.
    • Mount the caliper brackets and torque the 18 mm bolts to 90 ft lbs.
    • Check the condition of your brake pads and install new ones if needed.
    • Slide the brake pads into the brackets.
    • Compress the caliper and slide it onto the bracket and pads.
    • Bolt the caliper in, and torque the 13 mm bolts to 15-16 ft lbs.
  6. step : Replace the wheel (8:30)
    • Reinstall the small center cap and hub cap keeper.
    • Replace the lug nuts and lower the car, torque them in a star pattern to 100 ft lbs.
    • Put the hub cap back on and replace the safety nut and the final center cap back in place.
    • Place your hub cap key in back in your glove box for safekeeping.
    • Make sure you pump your brakes a few times before road testing to recompress the calipers.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Wire Brush
  • Chisel
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Anti-Seize Grease
  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 35mm Socket
  • 13mm Socket
  • 21mm Socket

4.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Quality and care
The quality of the parts Ive received threw 1a auto are amazingly easy to install with there helpful how to videos, just goes to show how much they care about there customers. Ive been an auto parts store guy for years but 1a auto will be my goto solve for my auto needs Very satisfied
October 15, 2018
One bad hub bearing out of two so far
For the most part I install the hub bearing and on the first drive Less Than 3 miles the bearing fail. However I am satisfied with how well the service was able to replace and stand by their product I have not receive the new bearing yet but I will soon see how well this one stands up.
October 21, 2018
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
How to remove the ABS from Wheel Bearing & Hub Assembly Front TRQ BHA53948 - 1ASHF00082?
DAVID P May 20, 2018
The tone ring is mounted to the back of the hub and will mount with it installed. Thank you!
Adam G May 21, 2018
How many yrs or miles does the warranty have?
Matthew W February 14, 2019
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.
Christa R February 14, 2019

Fits the following Makes:

Year Make Model Description
1997Ford Crown Victoria Ford Crown Victoria (Built After 4/97 Production Date) Front Wheel Bearing & Hub Assembly
1998-2002Ford Crown Victoria Ford Crown Victoria Front Wheel Bearing & Hub Assembly
1997Lincoln Town Car Lincoln Town Car (Built After 6/97 Production Date) Front Wheel Bearing & Hub Assembly
1998-2002Lincoln Town Car Lincoln Town Car Front Wheel Bearing & Hub Assembly
1997Mercury Grand Marquis Mercury Grand Marquis (Built After 4/97 Production Date) Front Wheel Bearing & Hub Assembly
1998-2002Mercury Grand Marquis Mercury Grand Marquis Front Wheel Bearing & Hub Assembly

Part Interchange

Brand Label Part Number
MOOG Hub Assemblies 513202
Mevotech H513202
SKF BR930168
Timken 513202

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASHF00082
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: BHA53948