1AACV00153-Ford Lincoln Mercury Front Driver Side CV Axle Shaft

Replaces

Ford Lincoln Mercury Front Driver Side CV Axle Shaft TRQ CSA82171

TRQ 1AACV00153 1AACV00153
FREE SAME DAY SHIPPING
Save 26%
List: $107.95 Save: $28.00
Part 1AACV00153
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: CSA82171

Frequently bought together

Description

Vehicle Fit

Warranty & Shipping
How-To & Tools

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.

Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, or Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories.

How to Replace CV Axle Shaft 02-05 Mercury Mountaineer

Created on: 2021-01-16

Check out this video to learn how to replace the CV axles on your 02-05 Mercury Mountaineer or Ford Explorer.

  1. step 1 : Removing the Wheel
    • Pry off the center cap with a flat blade screwdriver
    • Remove the 30mm hub nut
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step 2 : Loosening the Axle
    • Remove the 18mm control arm nut
    • Twist the 18mm on by hand a few threads
    • Hammer the wheel knuckle until it slides down
    • Hammer the axle out with a pry bar
    • Remove the 18mm nut
    • Pull the wheel knuckle forward
  3. step 3 : Removing the Stabilizer Link
    • Insert a 15mm socket and ratchet on the top
    • Insert a 16mm socket and ratchet on the bottom
    • Remove the bolt and remove the stabilizer link
    • If the link is broken, fill the top with rust penetrant
    • Insert locking pliers onto the bar
    • Remove the lower bolt with a 16mm socket and ratcher
    • Remove the plastic tube, remove the rest of the plastic with a hammer and chisel
    • Use locking pliers on the upper bushing and remove the lower nut
    • Hammer out the stabilizer link
  4. step 4 : Removing the Axle
    • Turn the wheel knuckle
    • Slide the axle back and remove it from the hub
  5. step 5 : Installing the Axle
    • Insert the axle into the hub
    • Preliminarily tighten the hub nut
    • Insert the axle into the differential case
    • Push the ball joint into the wheel knuckle
    • Hand tighten the 18mm nut
    • Check to make sure the axle is in place
    • Tighten the 18mm nut
    • Tighten the 18mm nut to 90 foot-pounds
  6. step 6 : Reinstalling the Stabilizer Link
    • Slightly jack up the other side of the vehicle
    • Insert a washer onto the link
    • Insert a bushing onto the link
    • Insert the stabilizer link into place
    • Insert a bushing onto the link
    • Insert a washer onto the link
    • Insert the tube onto the link
    • Insert a washer onto the link
    • Insert a bushing onto the link
    • Insert the link through the sway bar
    • Insert a bushing onto the link
    • Insert a washer onto the link
    • Tighten the 15mm nut to the top of the link
    • Lower the jack
    • Tighten the 16mm nut on the bottom of the link
  7. step 7 : Reattaching the Wheel
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut to 180 foot-pounds
    • Tighten the lug nuts to between 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement

  • General Tools

    Jack Stands

    Floor Jack

  • Ratchets & Related

    A Piece of Pipe (for leverage)

    Torque Wrench

    Ratchet

  • Screwdrivers & Related

    Pry Bar

  • Sockets - Metric

    16mm Socket

    18mm Socket

    19mm Socket

    30mm Socket

Installation Video
Watch video

Fits these Makes

Year Make Model Description
2002-2005Ford Explorer Ford Explorer 4 Door Front Driver Side CV Axle Shaft
2003-2005Lincoln Aviator Lincoln Aviator Front Driver Side CV Axle Shaft
2002-2005Mercury Mountaineer Mercury Mountaineer Front Driver Side CV Axle Shaft

Part Interchange

Brand Label Part Number
Cardone New 66-2153
Cardone Select 66-2153
Ford 1L2Z3A427AA
Ford OEM 1L2Z3A427AA
GSP NCV11132
Lincoln 1L2Z3A427AA
Mercury 1L2Z3A427AA

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

TRQ
Brand #: CSA82171
Product Reviews
5.00/ 5.0 1
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Good quality at a great price
August 26, 2017
Had the parts installed a week ago and made a major difference in the vehicles ride. I'm please with part so far and will see how things go down the road
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Right rear CV joint2002 Mountaineer?
July 15, 2020
10
Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon! If you have any other questions, let us know.
July 15, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Ford Lincoln Mercury Front Driver Side CV Axle Shaft TRQ CSA82171-1AACV00153 does not fit your:



Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.