Replaces

Ford Front Wheel Bearing & Hub Assembly TRQ

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Tapered Roller Bearing

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 3C34-2B513-BA, 3C34-2B513-BB, 3C34-2B513-BC, 3C3Z-1104-BA, 3C342B513BA, 3C342B513BB, 3C342B513BC, 3C3Z1104BA
  • 4 Bolt Flange
  • Fits 8 Lug Wheel
  • Includes ABS sensor
  • Studs already installed
  • Direct replacement
  • Built to strict quality control standards
  • Fits 4 Wheel Drive models with fine stud threads

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.

 

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

BHA50021 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Remove the cotter pin from the axle nut if it has one
    • Loosen the axle nut
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (3:22)
    • Remove the bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (4:15)
    • Remove the two bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Remove a screw from the rotor if it has one
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Removing the Hub Assembly (5:18)
    • Remove the axle bolt
    • Place a punch in the axle hole and hammer it to release the hub from the splines
    • Remove the bolts from the back of the hub
    • Remove the wheel hub and bearing
  5. step : Installing the Hub Assembly (7:53)
    • Insert the wheel hub into the spindle
    • Tighten the hub bolts
    • Reinstall the axle nut
  6. step : Installing the Brake Rotor (8:58)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two into the caliper bracket
    • Torque the two bolts
  7. step : Installing the Brake Pads (9:48)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two bolts into the caliper
    • Torque the two bolts
  8. step : Reattaching the Wheel (11:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts in a crossing or star pattern
    • Torque the axle nut

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Chisel
  • Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What type of thread are they?
Francisco U May 10, 2019
These have fine thread studs.
Tim K May 10, 2019

Fits the following Makes:

Year Make Model Description
2002Ford Excursion Ford Excursion 4 Wheel Drive with 4 Wheel ABS Brakes with Fine Thread Wheel Studs Front Wheel Bearing & Hub Assembly
2003-2005Ford Excursion Ford Excursion 4 Wheel Drive with 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly
2003-2004Ford F250 Super Duty Truck Ford F250 Super Duty Truck 4 Wheel Drive with 4 Wheel ABS Brakes with Fine Thread Wheel Studs Front Wheel Bearing & Hub Assembly
2003-2004Ford F350 Super Duty Truck Ford F350 Super Duty Truck 4 Wheel Drive with 4 Wheel ABS Brakes with Fine Thread Wheel Studs with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly

Part Interchange

Brand Label Part Number
Chicago Rawhide BR930438
Drive Tech America NT515056
Ford 3C3Z-1103BA
Ford 3C3Z-1104BA
Ford 3C34-2B513BB
Ford 3C34-2B513BA
Ford 3C34-2B513BC
Ford 3C34-2B513BD
Ford OEM 3C3Z-1104BA
Ford OEM 3C3Z-1103BA
Ford OEM 3C34-2B513BA
Ford OEM 3C34-2B513BC
Ford OEM 3C34-2B513BB
Ford OEM 3C34-2B513BD
GMB 725-0166
MOOG Hub Assemblies 515056
Mevotech H515056
Motorcraft HUB-111
Raybestos 715056
Raybestos Brakes 715056
SKF BR930438
SKF BTD-5137-A
Timken SP450205
Timken SP450105
Timken SP580205

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASHF00092
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA50021