FDBSS00012-Ford Front or Rear Mud Flap Pair

Replaces

Ford Front or Rear Mud Flap Pair Ford OEM E7TZ-16A550-A

FDBSS00012
FREE SAME DAY SHIPPING
Save 28%
List: $82.95 Save: $23.00
Part FDBSS00012
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: E7TZ-16A550-A

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Color:   Black
  • Quantity:   Pair

Specifications:

  • Brand New Ford Flat Mud Flap
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front or Rear
  • Black finish
  • Includes "Ford" Logo
  • Original equipment parts

Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.

OEM Part

Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Adjusting the Mud Flap (0:18)
    • With the wheel on the vehicle and the vehicle grounded, press the flap to the wheel well and align it
    • Trace around the wheel well on the mud flap with a marker
  2. step : Removing the Wheel (0:57)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack from the rear differential
    • Secure the vehicle on jack stands the axle housing
    • Remove the lug nuts
    • Pull off the wheel
  3. step : Installing the Mud Flap (1:48)
    • If the vehicle has fender flarings, slide the flaring over to access factory mounting points
    • Remove the two clips from the bottom of the wheel well with a trim tool
    • Line up the mud flap and press a hole into it based on the mounting points with a pick
    • If the vehicle has fender flares, press a hole through the flare with a pick to access the factory mounting points
    • Drill a hole through the mud flap with a 5/16 drill bit
    • Insert the j-nut between the metal and plastic on the lower mounting point in the wheel well
    • Line up the flap to the wheel well and tighten the lower bolt
    • Drill a third upper hole into the flap and fender flare for the upper bolt
    • Apply a j-nut and bolt to the upper hole
    • Drill a hole through the flap to the middle mounting hole
    • Apply a j-nut and bolt to the middle hole
    • Remove the mud flap and use the holes in the flap as an indicator for the opposite side
    • Apply holes to the second mud flap with a pick
    • Repeat the installation process for the other side
    • If needed, slightly widen the holes to adjust the flap easier
  4. step : Reattaching the Wheel (11:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 150 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill Bit Set
  • Drill

  • General Tools

  • Pick

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 7mm Socket
  • 22mm Socket


Fits the following Makes:

Year Make Model Description
1988-1989Ford Bronco Ford Bronco Front or Rear Mud Flap Pair
1996Ford Bronco Ford Bronco Front or Rear Mud Flap Pair
1990-2012Ford E150 Van Ford E150 Van Front or Rear Mud Flap Pair
1990-2012Ford E250 Van Ford E250 Van Front or Rear Mud Flap Pair
1990-2005Ford E350 Van Ford E350 Van Front or Rear Mud Flap Pair
1999-2012Ford E350 Van Super Duty Ford E350 Van Super Duty Front or Rear Mud Flap Pair
2003-2006Ford Expedition Ford Expedition Front or Rear Mud Flap Pair
1987-1996Ford F150 Truck Ford F150 Truck Front or Rear Mud Flap Pair
2004-2009Ford F150 Truck Ford F150 Truck without Nerf Bar Front or Rear Mud Flap Pair
2010-2016Ford F150 Truck Ford F150 Truck Front or Rear Mud Flap Pair
1987-1997Ford F250 Truck Ford F250 Truck Front or Rear Mud Flap Pair
1987-1997Ford F350 Truck Ford F350 Truck Front or Rear Mud Flap Pair

Part Interchange

Brand Label Part Number
DIY Solutions BAS00447

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
Brand #: E7TZ-16A550-A
Product Reviews
5.00/ 5.0 1
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great Product!
October 26, 2020
The item came on time with secure packaging. They are quality mud flaps. Highly recommend this company!
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Ford Front or Rear Mud Flap Pair Ford OEM E7TZ-16A550-A-FDBSS00012 does not fit your:



Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.