1AEAL00444-Ford Focus Alternator

Replaces

Ford Focus Alternator DIY Solutions ECS00057

1AEAL00444
FREE SAME DAY SHIPPING
Save 28%
List: $175.95 Save: $50.00
Only 8 left in stock
Part 1AEAL00444
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: ECS00057
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Voltage / Wattage / Amperage Rating:   110 Amp

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a single purchase of a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Returns: Parts with electrical components cannot be returned once installed.

  1. step : Accessing the Alternator (1:02)
    • Using a 10mm socket disconnect the negative battery cable
    • Remove the 10mm bolt in front of the water bottle
    • Disconnect the clip on the back of the water bottle and lift it out of the way
    • Lift power steering reservoir up and out of the way
    • Remove the two 10mm bolts on the dust and rock cover under the car
    • Remove the cover to access the belt tensioner
    • Using a 15mm wrench and pipe (for leverage) turn the bolt on the tensioner clockwise to loosen the belt
    • Pull the belt off of the alternator pulley and push it out of the way
    • Undo the bolt on the wiring harness near the alternator
    • Using a 7mm socket remove the bolts holding the solenoid shaped object over the alternator (on the firewall)
    • Push the object towards the middle of the car
  2. step : Removing the Alternator (4:00)
    • Remove the 10mm bolt on the front of the alternator
    • Using a flexible ratchet remove the opposite 10mm bolt on the alternator
    • Pull the Alternator up and out
    • Disconnect the connector on the back of the alternator
    • Remove the 10mm nut from the alternator power wire. Pull the power wire free
    • Disconnect the line over the alternator by disconnecting the green clip. Force everything out of the way
    • Lift the alternator out of the engine
  3. step : Replacing the Alternator (9:00)
    • Fit the alternator down into the engine
    • Once its down in line it up and reconnect the wires, and harnesses
    • Line up the tubes that were forced aside
    • Replace all of the bolts in the alternator
    • Reconnect the green clip
    • Put the object on the firewall back into place
    • Replace the harness clip
  4. step : Reinstalling Your Belt (If Necessary) (11:16)
    • Use the belt diagram to make sure the belt is in place on each pulley
    • Using the 15mm wrench with pipe loosen the tensioner and pull the belt down into place
    • Tighten the tensioner when everything is lined up
  5. step : Replacing Bottles and Covers (13:17)
    • Replace the dust and rock shield over the belt tensioner
    • Push the power steering reservoir back into place
    • Push the water bottle back into place and reinstall the bolts
    • Reconnect the negative battery cable

Tools needed for replacement:

    General Tools

  • Jack Stands

  • Ratchets & Related

  • Socket Extensions
  • Swivel
  • Ratchet
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket

  • Wrenches - Metric

  • 15mm Wrench


Fits the following Makes:

Year Make Model Description
2000-2004Ford Focus Ford Focus ZX3 L4 2.0L DOHC Alternator
2000-2004Ford Focus Ford Focus SE L4 2.0L DOHC Alternator
2000-2004Ford Focus Ford Focus ZTS L4 2.0L DOHC Alternator
2000-2004Ford Focus Ford Focus LX L4 2.0L DOHC Alternator
2000Ford Focus Ford Focus Sony Limited Edition L4 2.0L DOHC Alternator
2002-2004Ford Focus Ford Focus ZTW L4 2.0L DOHC Alternator
2002-2004Ford Focus Ford Focus ZX5 L4 2.0L DOHC Alternator

Part Interchange

Brand Label Part Number
Bosch ALT-1616
DIY Solutions ECS00057
Lester 8260
TYC 2-08260

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: ECS00057
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Ford Focus Alternator DIY Solutions ECS00057-1AEAL00444 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.