1APBS00043-Ford F150 Lincoln Mark LT Front Semi-Metallic Performance Brake Pad & Rotor Kit

Replaces

Ford F150 Lincoln Mark LT Front Semi-Metallic Performance Brake Pad & Rotor Kit

1APBS00043

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Front Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 6 Lug
  • Front Brake Rotor Diameter: 12.99 in. (330mm)
  • Product Line: Performance
  • Brake Rotor Coating: Premium G-Coated
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware
FREE SAME DAY SHIPPING
Save 36%
List: $205.95 Save: $74.00
Part 1APBS00043
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ Performance
Brand #: BKA12071

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   6 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   12.99 in. (330mm)
  • Brake Rotor Coating:   Premium G-Coated
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Performance Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Premium G-Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:44)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:21)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (2:09)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the two 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (3:02)
    • Remove two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread one lug nut and tap the rotor loose with a hammer
  5. step : Installing the Brake Rotor (3:31)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply grease to the caliper slides
    • Remove the brake pad slides
    • Clean the slide mounting area with a wire brush
    • Put the bracket back into place
    • Start the two 18mm bolts by hand
    • Tighten the 18mm bolts to 95 foot-pounds of torque
  6. step : Installing the Brake Pads (5:39)
    • Put the brake pad slides into place
    • Push the brake pad slide tabs into place with a hammer and flat blade screwdriver
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Push in the brake pad clips
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten bolts to 25 foot-pounds
  7. step : Reattaching the Wheel (8:42)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut to X foot-pounds
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (9:31)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Large C-Clamp
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 21mm Socket
  • 13mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2004Ford F150 Truck Ford F150 Truck with New Body Style 4 Wheel Drive with 6 Lug Wheels Front Semi-Metallic Performance Brake Pad & Rotor Kit
2005-2008Ford F150 Truck Ford F150 Truck 4 Wheel Drive with 6 Lug Wheels Front Semi-Metallic Performance Brake Pad & Rotor Kit
2006-2008Lincoln Mark LT Lincoln Mark LT with 6 Lug Wheels Front Semi-Metallic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 54109
Bendix PRT5527
DIY Solutions BFS01687
DuraGo BR54109
Raybestos EHT1083H
Raybestos Brakes EHT1083H
Raybestos Brakes 680180
Wagner BD126111

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ Performance
Brand #: BKA12071
Product Reviews
5.00/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
New brakes
So far so good. Works well stops good. I have no complaints for the product. I would defiantly order again.
September 21, 2017
Service was great after i ordered my parts it only took 3 days for shipping n free..that was way quicker than my local auto parts we have.And yes i will continue to order my parts from this guys....
March 27, 2018
Brake rotors and pads
Ordered brake pads and rotors for my 2007 Ford F150. Got them SUPER fast and right the first time. That doesnt always happen. Great quality and great price. Will definitely order again.
August 9, 2018
Perfect Fit and Nice Upgrade
Bought these for the family F-150. What an improvement! Highly recommend spending a few bucks more and going with the slotted drilled. They are the real deal. Thanks!
September 25, 2018
Brake kit for 2004 F150
Second set Ive purchased. The first went on my 2014 F150 and they are great! So I bought a second for my sons pickup. So far he is really happy with them. His truck had 6" lift and 35" tires on 20" rims. So we went with these slotted rotors to help to the extra weight. Thank you 1AAuto for a great product!
July 24, 2019
Great
I was very pleased with it.fits perfect and stops so smooth.thats for all you have done.
November 13, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Ford F150 Lincoln Mark LT Front Semi-Metallic Performance Brake Pad & Rotor Kit-1APBS00043 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.