Our aftermarket manifold kits are some of the highest quality replacements on the market! These cast iron manifolds have been designed to eliminate the faults of the original Ford design.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • 2 Bolt Flange
  • Direct replacement for 2" Exhaust Systems
  • Replaces original manifolds that are cracked from thermal expansion and contraction
  • Corrosion resistant
  • Strengthened and redesigned in the vulnerable areas of failure

Now you can buy a high quality exhaust manifold kit for a fraction of the price form the dealer. REPLACE your broken, warped, or cracked one now with this great fitting, alternative.

NOTE: There are 2 different RH (Passenger Side) manifolds for this application. This manifold fits models with the 2 inch outlet only. The other design has a 2.32 inch outlet (Casting #: C5TZ9430A).

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Just as described .
Quick shipping and ease of installation.
March 27, 2017
Purchased
11 months ago
Great price and quality.
I ordered these for my 1965 Galaxie 500 LTD. It has a 390 out of a 1974 F100. The left side fit perfectly but the right side needed a slight downward angle to fit, so I couldn't use the right side manifold. Luckily the left side was the one I most needed to replace. I'll just sell the other one online.
June 21, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 9 answers
Does these manifolds have the space available to attract the egr valve to it that connects to the intake?
Michael W on May 28, 2016
BEST ANSWER: There is a threaded port on the driver manifold. I'm not sure what side your EGR is attached to
Do these exhaust manifolds come with the automatic choke tube inlet for one to be installed into the manifold to the carburator like the factory original ones?
Michael W on May 28, 2016
BEST ANSWER: It comes with left and right manifolds only. No bolts for the exhaust or anything else. I do not know what an automatic choke tube inlet is because I have a manual choke carb, but this fit my Ford 390 FE truck engine perfectly. Keep in mind that FE engines in a car vs. FE's in a truck may require different manifolds.
the 390 im fixing was not original to the truck so im not exactly sure what it came out of. i'm looking for ford part casting number c8ae-430-a and c8ae-431-b. setup looks like maybe a 68 ford galaxy. would this work?
Tracy W on Jun 2, 2017
BEST ANSWER: I used this manifold on a 390 from a truck . . . the truck manifolds are different from the car manifolds so if you are putting this in a car it may not be correct. My engine came out of a mid seventies f-250 I think, but the engine is in a 66 F-100 now. Again, should be fine for a 390 in a truck but maybe not for a car. If the engine came from a car and is going in a truck it should be ok . . . but not if its staying in a car.


Vehicle Fit

  • 1965-1967 Ford F100 Truck 2 Inch Outlet Exhaust Manifold V8 5.8L 352ci Pair
  • 1968-1976 Ford F100 Truck 2 Inch Outlet Exhaust Manifold V8 6.4L 390ci Pair
  • 1968-1976 Ford F100 Truck 2 Inch Outlet Exhaust Manifold V8 5.9L 360ci Pair
  • 1975-1976 Ford F150 Truck 2 Inch Outlet Exhaust Manifold V8 6.4L 390ci Pair
  • 1975-1976 Ford F150 Truck 2 Inch Outlet Exhaust Manifold V8 5.9L 360ci Pair
  • 1965-1967 Ford F250 Truck 2 Inch Outlet Exhaust Manifold V8 5.8L 352ci Pair
  • 1968-1976 Ford F250 Truck 2 Inch Outlet Exhaust Manifold V8 6.4L 390ci Pair
  • 1968-1976 Ford F250 Truck 2 Inch Outlet Exhaust Manifold V8 5.9L 360ci Pair
  • 1965-1967 Ford F350 Truck 2 Inch Outlet Exhaust Manifold V8 5.8L 352ci Pair
  • 1968-1976 Ford F350 Truck 2 Inch Outlet Exhaust Manifold V8 6.4L 390ci Pair
  • 1968-1976 Ford F350 Truck 2 Inch Outlet Exhaust Manifold V8 5.9L 360ci Pair
  • 1973-1975 Ford Motorhome M-400/450 2 Inch Outlet Exhaust Manifold V8 6.4L 390ci Pair
  • 1973-1975 Ford Motorhome M-400/450 2 Inch Outlet Exhaust Manifold V8 5.9L 360ci Pair
Part #: 1AEEK00036

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More