Replaces

Ford Escape Focus Mazda Tribute Thermostat with Housing Assembly - 1AHCX00043

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

If your car is leaking coolant around the thermostat, or one of the connector tubes on your thermostat housing is broken or cracked, then this could be your solution.

Specifications:

  • Direct replacement
  • Includes thermostat and o-ring as shown
  • Built to strict quality control standards
  • Correct for models without housing-mounted cooling sensor

Over time from thermal expansion and contraction the mating surfaces on the housing can warp or crack. You may also find if you go to change the thermostat the 2 halves of the housing will not come apart. If you are experiencing any of these issues replace your thermostat housing with our direct replacement part.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Thermostat (0:22)
    • Disconnect the lower radiator hose to drain the coolant into a catch pan
    • Disconnect the ignition coil electrical connector
    • Disconnect the overflow hose from the thermostat housing
    • Disconnect the upper and lower front hoses from the thermostat housing
    • Remove the three 10 mm thermostat housing bolts (the bolt heads facing to the side, not the bolt heads facing to the front)
    • Move the thermostat housing forward to disconnect the rear hose
  2. step : Installing the Thermostat (9:22)
    • Clean the area around the thermostat mount on the engine to ensure a good seal with the new thermostat
    • Wrap thread sealing tape at the end of the mounting bolts
    • Apply a light coat of silicone paste to the thermostat housing gasket
    • Reconnect the rear hose to the thermostat housing
    • Align the thermostat housing with the engine and start the three 10 mm mounting bolts
    • Torque the 10 mm thermostat housing bolts to 80 in-lb
    • Reconnect the upper and lower front hoses to the thermostat housing
    • Reconnect the overflow hose to the thermostat housing
    • Reconnect the ignition coil electrical connector
    • Reconnect the lower radiator hose
  3. step : Refilling the Coolant (17:21)
    • Use a vacuum system to apply vacuum pressure to the coolant system, and check for leaks
    • Use the filling tube of the vacuum system to refill the coolant
    • Attach a coolant funnel to the reservoir and add coolant to the funnel
    • Run the engine with the heat on to work any remaining air bubbles out of the system
    • Plug the funnel to remove it
    • Close the coolant reservoir

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Materials, Fluids, and Supplies

  • Thread Sealing Tape
  • Silicone Paste

  • Pliers, Cutters & misc Wrenches

  • Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

  • Specialty Tools

  • Coolant Vacuum Filler
  • Coolant Funnel Set

5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
overall review of company
My order arrived sooner than promised, in perfect condition and at the promised price. would definitely order from them again.
March 15, 2017
This website is great.
When shopping for this part I called all around my local auto part stores. And they were all at least double the price and I would have to wait a week for them to receive the item. This was very easy very fast shipping and a good quality product. They even had a video of what I should do to exchange it. I highly recommend this website and will definitely be a return customer.
July 28, 2018
Good part
This part was a good price and after was installed car works good
October 5, 2018
All fixed!
This part fit well and stopped the leak I had. Glad I was able to fix it myself.
May 16, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2004Ford Escape Ford Escape L4 2.0L Thermostat with Housing Assembly
2000Ford Focus Ford Focus L4 2.0L DOHC (Built After 10/99 Production Date) Thermostat with Housing Assembly
2001-2004Ford Focus Ford Focus (excluding SVT Models) L4 2.0L DOHC Thermostat with Housing Assembly
2001-2004Mazda Tribute Mazda Tribute L4 2.0L Thermostat with Housing Assembly
Part 1AHCX00043
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.