Replaces

Ford Dodge Mazda Mercury Front Sway Bar Link Pair

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Quantity:   Pair

Specifications:

  • Comes as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side)
  • Kit includes:
    • (2) Links (Bolts)
    • (2) Sleeves
    • (8) Rubber Bushings
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:45)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:09)
    • Hold the sway bar link stud with a 16mm wrench
    • Remove the 15mm nut from the sway bar link
    • If the sway bar link is broken, fill the tube with rust penetrant
    • Hold the tube with vise grip pliers
    • Loosen the sway bar link stud with a 16mm socket and ratchet
    • Pull off the plastic tube
    • Remove any remaining plastic with a hammer and chisel
    • Loosen the sway bar link stud with a 16mm socket and ratchet
    • Push out the stud with a hammer
  3. step : Installing the Sway Bar Link (2:55)
    • Lift the opposite side of the vehicle with a jack
    • Put a washer onto the sway bar link stud
    • Put on a bushing
    • Put the sway bar link into place, through the control arm
    • Put on a bushing
    • Put on a washer
    • Put on the plastic tube
    • Put on a washer
    • Put on a bushing
    • Put the sway bar link into place, through the sway bar
    • Put on a bushing
    • Put on a washer
    • Thread on the 16mm nut
    • Tighten the nut preliminarily
    • Lower the jack
    • Support the suspension at ride height with a jack
    • Tighten the 16mm nut until the bushings are the same thickness as the washers
  4. step : Reattaching the Wheel (4:31)
    • Clip the ABS sensor wiring into place
    • Wipe down the rotor
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Chisel
  • Jack Stands
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - Metric

  • 16mm Socket
  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 16mm Wrench

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What are total length of these sway bar links?
Joshua B January 28, 2016
Hello, The length specs are not available as these are a direct fit for the exact models listed in the fit list. These will replace the OE parts without any modifications.
Brian F January 28, 2016
11 inches
Alfred R January 28, 2016
They were a perfect fit I dont recall the length but they went in very easily with no issues
T O June 14, 2019
What is the length of the sleeve on this pair of links?
William B July 12, 2019
Actual Measurements are not listed or available. Our parts are exact replacements for your vehicles OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
Ian P July 12, 2019

Fits the following Makes:

Year Make Model Description
1994-2001Dodge Ram 1500 Truck Dodge Ram 1500 Truck Rear Wheel Drive Front Sway Bar Link Pair
1994-2002Dodge Ram 2500 Truck Dodge Ram 2500 Truck Rear Wheel Drive Front Sway Bar Link Pair
1994-2002Dodge Ram 3500 Truck Dodge Ram 3500 Truck Rear Wheel Drive with Independent Front Suspension Front Sway Bar Link Pair
1995-2010Ford Explorer Ford Explorer Front Sway Bar Link Pair
2001-2003Ford Explorer Sport Ford Explorer Sport Front Sway Bar Link Pair
2001-2005Ford Explorer Sport Trac Ford Explorer Sport Trac Front Sway Bar Link Pair
2007-2010Ford Explorer Sport Trac Ford Explorer Sport Trac Front Sway Bar Link Pair
1998-2011Ford Ranger Ford Ranger Front Sway Bar Link Pair
2001-2008Mazda B2300 Truck Mazda B2300 Truck Front Sway Bar Link Pair
1998-2001Mazda B2500 Truck Mazda B2500 Truck Front Sway Bar Link Pair
1998-2007Mazda B3000 Truck Mazda B3000 Truck Front Sway Bar Link Pair
1998-2008Mazda B4000 Truck Mazda B4000 Truck Front Sway Bar Link Pair
1997-2010Mercury Mountaineer Mercury Mountaineer Front Sway Bar Link Pair

Part Interchange

Brand Label Part Number
MOOG K7275
MOOG Chassis Products K7275

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASSL00003
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.