Replaces

Ford Dodge Mazda Mercury Front Driver or Passenger Side Sway Bar Link

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Specifications:

  • Fits LH (Driver Side) or RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:44)
    • Loosen the five 19mm lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Slide off the wheel
  2. step : Removing the Sway Bar Link (1:11)
    • Apply rust penetrant to the sway bar link
    • Attach a 17mm wrench to the top sway bar link nut
    • Brace the wrench against the vehicle frame
    • Turn the 16mm bolt at the bottom of the sway bar link to loosen the nut
    • Remove the 17mm nut
    • Tap the top of the bolt with a hammer
    • Remove the sway bar link bolt
    • Remove the sway bar link bushings, washers, and sleeve
  3. step : Installing the Sway Bar Link (2:35)
    • Slide a washer onto the sway bar link bolt
    • Slide a bushing onto the sway bar link bolt
    • Slide the sway bar link bolt through the control arm
    • Slide a bushing onto the sway bar link bolt
    • Slide a washer onto the sway bar link bolt
    • Slide the sleeve onto the sway bar link bolt
    • Slide a washer onto the sway bar link bolt
    • Slide a bushing onto the sway bar link bolt
    • Insert the sway bar link bolt into the sway bar
    • Slide a bushing onto the sway bar link bolt
    • Raise the suspension with a jack
    • Slide a washer onto the sway bar link bolt
    • Thread the nut onto the sway bar link
    • Attach a 17mm wrench to the top sway bar link nut
    • Counterhold the sway bar link nut with the wrench
    • Tighten the sway bar link bolt with a 16mm socket and ratchet
    • Lower the suspension by lowering the jack
  4. step : Installing the Wheel (4:44)
    • Slide the wheel into place
    • Start the five 19mm lug nuts
    • Lower the vehicle to the ground
    • Torque the lug nuts to 100 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Sockets - Metric

  • 19mm Socket
  • 16mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 17mm Wrench

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1994-2001Dodge Ram 1500 Truck Dodge Ram 1500 Truck Rear Wheel Drive Front Driver or Passenger Side Sway Bar Link
1994-2002Dodge Ram 2500 Truck Dodge Ram 2500 Truck Rear Wheel Drive Front Driver or Passenger Side Sway Bar Link
1994-2002Dodge Ram 3500 Truck Dodge Ram 3500 Truck Rear Wheel Drive with Independent Front Suspension Front Driver or Passenger Side Sway Bar Link
1995-2010Ford Explorer Ford Explorer Front Driver or Passenger Side Sway Bar Link
2001-2003Ford Explorer Sport Ford Explorer Sport Front Driver or Passenger Side Sway Bar Link
2001-2005Ford Explorer Sport Trac Ford Explorer Sport Trac Front Driver or Passenger Side Sway Bar Link
2007-2010Ford Explorer Sport Trac Ford Explorer Sport Trac Front Driver or Passenger Side Sway Bar Link
1998-2011Ford Ranger Ford Ranger Front Driver or Passenger Side Sway Bar Link
2001-2009Mazda B2300 Truck Mazda B2300 Truck Front Driver or Passenger Side Sway Bar Link
1998-2001Mazda B2500 Truck Mazda B2500 Truck Front Driver or Passenger Side Sway Bar Link
1998-2007Mazda B3000 Truck Mazda B3000 Truck Front Driver or Passenger Side Sway Bar Link
1998-2009Mazda B4000 Truck Mazda B4000 Truck Front Driver or Passenger Side Sway Bar Link
1997-2010Mercury Mountaineer Mercury Mountaineer Front Driver or Passenger Side Sway Bar Link

Part Interchange

Brand Label Part Number
DIY Solutions SUS06607
MOOG K7275
MOOG Chassis Products K7275

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Just as described!!
Came just as described. Great service! Arrived on time and was a perfect fit. Thank you!!
June 14, 2018
Great personality easy to talk to great customer service
Very happy with all the vehicle parts we ordered. I never had any problems with any of your products I would recommend you to any body
August 13, 2019
Part 1ASSL00001
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: SUS06607