1ABRX00012-Ford Dodge Chrysler Rear Parking Brake Shoe Hardware Kit


Ford Dodge Chrysler Rear Parking Brake Shoe Hardware Kit DIY Solutions

Parking Brake Shoe Hardware Kit
20% OFF
20% OFF
DIY Solutions
Brand BFS01516
In Stock
Part 1ABRX00012

Out of Stock




Vehicle Fit

Warranty & Shipping
How-To & Tools

Replace those frozen, corroded or broken springs today with this high quality replacement set!


  • Will service both LH (Driver Side) & RH (Passenger Side) REAR PARKING BRAKES
  • Kit includes:
    • 6 Springs
    • 4 Retainers
    • 4 Pins
    • 2 Adjusters
  • Direct replacements
  • Built to strict quality control standards
  • Correct for models with rear disc brakes

This hardware kit makes a great replacement and has good cost savings over the factory parts.

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.  Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses.  Final shipping costs are available at checkout.

How to Replace Parking Brake Shoe Hardware 07-10 Dodge Ram

Created on: 2021-01-16

Watch this video to learn how to fix loose or worn emergency brakes. The experts at 1A Auto show you how to replace the parking brake shoes and hardware on your 07-10 Dodge Ram.

  1. step 1 : Removing the Wheel
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step 2 : Removing the Caliper
    • Remove the 21mm bolts from the caliper carrier
    • Secure the caliper bracket and caliper with a bungee chord
  3. step 3 : Removing the Rotor
    • If the rotor is frozen, make sure the e-brake shoes are spun down if they're contacting the rotor
    • Tap the rotor from the front with a hammer without damaging the hub's studs
    • Pull the rotor off
  4. step 4 : Removing the Brake Shoes
    • Chisel off the rear retaining pin with a hammer and pick
    • Remove the two brake shoe springs with the vise grip pliers, beginning with the bottom
    • Remove the brake adjuster
    • Remove the rear brake shoe from the mechanism at the top
    • Remove the brake shoes
  5. step 5 : Installing the Brake Shoes
    • Be sure that the larger, single groove is on the bottom
    • Thread the upper shoe spring into the shoes
    • Place the shoes onto the hub
    • Pry out the shoes and insert them into the mechanism
    • Twist on the front retaining spring with vise grip pliers
    • Put the adjuster into place
    • Insert the lower spring in with vise grip pliers
    • Thread the retaining pin into the brake shoe
    • Lock the pin onto the holder
    • Repeat the steps on the opposite side
  6. step 6 : Reinstalling the Rotor
    • Remove surface rust or scaling from the hub with a wire brush
    • Apply brake grease to the hub without touching the studs
    • Insert the rotor into place
    • Apply brakes parts cleaner to the rotor
    • Put your truck in neutral
    • Check that the rotor spins freely - a little resistance is ok
    • Adjust the e-brake shoes with the star wheel if needed
  7. step 7 : Reinstalling the Caliper
    • Remove the bungee chord from the caliper
    • Insert the caliper into place
    • Tighten the two 21mm bolts into the caliper bracket
    • Torque the 21mm bolts to 100 foot-pounds
  8. step 8 : Reinstalling the Wheel
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement

  • General Tools


    Jack Stands


    Wire Brush

    Floor Jack

  • Materials, Fluids, and Supplies

    Brake Parts Cleaner

    Anti-Seize Grease

  • Ratchets & Related

    Socket Extensions

    Torque Wrench


    1/2 Inch Breaker Bar

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Sockets - Metric

    21mm Socket

    22mm Socket

Installation Video
Watch video

Fits these Makes

Year Make Model Description
2007-2009Chrysler Aspen Chrysler Aspen Rear Parking Brake Shoe Hardware Kit
2003-2009Dodge Durango Dodge Durango Rear Parking Brake Shoe Hardware Kit
2002-2006Dodge Ram 1500 Truck Dodge Ram 1500 Truck Rear Parking Brake Shoe Hardware Kit
2007-2010Dodge Ram 1500 Truck Dodge Ram 1500 Truck Crew Cab Rear Parking Brake Shoe Hardware Kit
2007-2010Dodge Ram 1500 Truck Dodge Ram 1500 Truck Regular Cab Rear Parking Brake Shoe Hardware Kit
2004-2007Ford E150 Van Ford E150 Van Rear Parking Brake Shoe Hardware Kit

Part Interchange

Brand Label Part Number
DIY Solutions BFS01516

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

DIY Solutions
Brand BFS01516
In Stock
Product Reviews
5.00/ 5.0 1
brake parts
July 25, 2019
i would reccommend this product and every thing about it
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Ford Dodge Chrysler Rear Parking Brake Shoe Hardware Kit DIY Solutions-1ABRX00012 does not fit your:

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.