This replacement Ford Excursion or Pickup Truck corner parking light is just what you need to get your Ford in good looking form again!

Specifications

  • LH Driver Side
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Mounts in the fender
  • Does not include bulbs or wiring

This Ford Excursion or Pickup Truck corner parking lamp is a great replacement and has good cost savings over a parking light from the dealer.

 

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Changing the Headlight Bulbs (1:05)
    • Reach in to the back of the light and twist the ring counter clockwise
    • Pull it off to pull the bulb out
    • Hold the collar back and pull the bulb free
    • Push a new bulb in and snap it back into the ring
    • Push the bulb back into the assembly and twist clockwise
  2. step : Removing the Headlight Assembly (2:34)
    • Use an awl to pull the arms out and up on the side of the tabs holding in the headlight
    • Hook the awl into the top of the clip and force it up and out. Repeat on the other side of the light
    • Remove the clip down past the headlight wiring harness. Remove the clip by pressing in the wings on either side
    • Pull the headlight out
    • Disconnect the harnesses to free the light
  3. step : Installing the New Headlights (6:24)
    • Adjust the lower clip to match the clip on the old headlight
    • Measure the top adjustors to make sure they are the same distance from the light
    • Reconnect the light harnesses
    • Line up the light and push it in to connect it
    • Push the clips on the back, back into place
  4. step : Adjusting the Headlight (8:43)
    • Set the light to your states standards
    • The right Phillips screw adjusts the light left to right
    • The left Phillips screw adjusts the light up and down

Tools needed for replacement:

    General Tools

  • Flashlight

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Bent Tipped Awl

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:32 min)

Tools List:

    General Tools

  • Flashlight

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Bent Tipped Awl



This part replaces:

  • Partslink FO2520141
  • OE # XC3Z 13201 BA
  • TYC 12-5068-01-1
  • DEPO 331-1638L-UF

Vehicle Fit

  • 2000-2001 Ford Excursion Corner Light Driver Side
  • 1999-2000 Ford F250 Super Duty Truck Corner Light Driver Side
  • 1999-2000 Ford F350 Super Duty Truck Corner Light Driver Side
Part #: 1ALPK00099

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More